Getting the best out of mf 36rsal

[dannewhouse]

After some tips on getting the best from the combine.
Haven't got it into the field yet.
How do you set the auto level up?
Think I need to buy an operator's manual.
Comeing from an mf 29 if anyone's liking for one.
I don't need the sarcastic comments even if they are highly amusing.

 

[Sharny dubs]

Cant help with the al I'm afraid but follow the setting suggestions on the screen n keep it full. They like to be kept busy. Ours had a 16ft cut and it worked best in spring barley at a good 6 kph.

 

[dannewhouse]

This is 18ft non powerflow, what setting suggestions come on the screen, I'm sure these will make more sense when we get going with it

 

[snipe]

You set (calibrate) the auto level and cutting height on flat ground in the yard. Is it a dv1(big white tv box) or a dv2( flat gray touch screen)

 

[dannewhouse]

Dv1

 

[Badshot]

Calibrate it before you leave the yard.
Mine always needed an annual calibration.
The suggested settings are a good start, theres a whole list in the screen.
I've a lot of the faster moving spares, including rear tyres, rape sieve, and side knife, shaft speed sensors, knife sections, also a Griffith elder weigher.
There's photos in classifieds if you're interested.

 

[Sharny dubs]

Dv1

Off the top of my head
Operator manual - machine setting - initial setting - pick your crop. There are heaps - pick your moisture dry normal or moist. The recommended will appear.