GPS signal out of Agleader Integra and 1500 receiver

[JonL]

Run an Agleader Integra with a GPS1500 receiver on a Sands sprayer
Wanting to output a GPS signal to a Kverneland spreader control box
Evidently it isn't as straightforward as you would hope as the Agleader can't output to an RS232 connection like most boxes.
Anyone out there know of a way to achieve this?

 

[Alistair Nelson]

GPS out isn't a problem i have that on mine for the section control on the KRM spreader. The one thats the problem is an equivalent to a radar forward speed out put. Give Derek, Neil or Chris a call at Precise solutions and they will provide you with the exact details of how to achieve it and from where.

Alistair

 

[JonL]

Thanks Alistair

So your Agleader is outputting GPS to a KRM box? I think I can get around the forward speed with a very low tech wheel speed sensor

 

[Alistair Nelson]

Yes outputting GPS into the KRM for section control then I get forward speed signal from somewhere else. Yes so you could get forward speed from prop sensor, ISO socket in cab or a radar.