MrOl
Member
- Location
- Herts / Essex
So managed to break the seat in my JD - and just wondering on whether it’s repairable or whether best to try and find a new suspension base to replace the broken one
Basically where the suspension runs back and forth the bushings have worn away and broken and then the bare metal has rubbed broken thru. I’m thinking either:
1. Get some new bushings, take suspension apart, weld broken metal and then fit back together. But wondering if other parts of the seat suspension might also fail soon...?
2. Get a new suspension base - any suggestions where might have one? A few on eBay for the 115-150 range but it hard to judge quality. Tractor isn’t worked hard so would probably be fine anyway as long as they fit ok!
All the other seat parts are in good condition - cushions etc - and original for the 2650 so don’t want to change those.
Thanks for any help / tips
Basically where the suspension runs back and forth the bushings have worn away and broken and then the bare metal has rubbed broken thru. I’m thinking either:
1. Get some new bushings, take suspension apart, weld broken metal and then fit back together. But wondering if other parts of the seat suspension might also fail soon...?
2. Get a new suspension base - any suggestions where might have one? A few on eBay for the 115-150 range but it hard to judge quality. Tractor isn’t worked hard so would probably be fine anyway as long as they fit ok!
All the other seat parts are in good condition - cushions etc - and original for the 2650 so don’t want to change those.
Thanks for any help / tips