Greenstar 4 Work manager (coverage disappearing)

Hendryk

Member
Arable Farmer
Hi folks
So I’ve got the problem that my coverage disappears lately. If I knock off for the night it’ll be gone the next day. I’m running Greenstar 4 on a built in screen on a 9520RT.It has got a lot of work data and paddocks mapped into it and I think it might be full but I can neither find what they called "work list“ or "data manager“ in greenstar 3.
Does anyone know how to pull up that information?
Or did anyone experience the same issues regarding the coverage?
Any help would be greatly appreciated,
Cheers
 

Hendryk

Member
Arable Farmer
this is what an already worked field looks like. There is a whole bunch of runs blank in the middle, and where the runs stop towards the middle of the screen, They actually go further (thats about the middle of the field).
it doesn’t make a difference if I zoom in or out.
62932FF7-A106-432D-A0E9-BAAC67DCB398.jpeg
 

benny6910

Member
Arable Farmer
Have you got any boundaries saved in it? If I change a boundary it always says resume work or start new work. If I click on start new it clears all previous coverage
 

Hendryk

Member
Arable Farmer
Have you got any boundaries saved in it? If I change a boundary it always says resume work or start new work. If I click on start new it clears all previous coverage
No I have no boundaries as of yet but ut should bring up that message even if you change fields which it doesn’t.
Could it just be a corrupted database?
 

benny6910

Member
Arable Farmer
No I have no boundaries as of yet but ut should bring up that message even if you change fields which it doesn’t.
Could it just be a corrupted database?
I would make a false boundary save it as a field then see if it asks you then. Possibly make 2 then swap over from one to another.
 

Hendryk

Member
Arable Farmer
I would make a false boundary save it as a field then see if it asks you then. Possibly make 2 then swap over from one to another.
Thanks I will give that a go. I’ll also try to export the guidance data (not coverage/work!) and see if I can get it factory reset.
Ill keep you updated what happens
 

Hendryk

Member
Arable Farmer
I resolved the problem:
I found the work manager and switched between two works manually which brought up the coverage and totals.
then I exported my farm data (all of it) and reset the display and imported the data back in. Now the coverage alerts are back and the coverage is there without having to switch back and forth.
it must have been some sort of software glitch. I’m running version (GS4) 1.18.1754-89 for anyone wondering
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 77 43.5%
  • Up to 25%

    Votes: 62 35.0%
  • 25-50%

    Votes: 28 15.8%
  • 50-75%

    Votes: 3 1.7%
  • 75-100%

    Votes: 3 1.7%
  • 100% I’ve had enough of farming!

    Votes: 4 2.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top