GS3 2630 Error message Help

[Phil P]

Anyone had this come up on there display before? Won’t move past the loading page.
Thanks

 

[Northern farmer]

Not familiar with any JD gear but NAND Flash refers to some system memory module, a hardware failure.

 

[Phil P]

Not familiar with any JD gear but NAND Flash refers to some system memory module, a hardware failure.

Looking that way, ams guy just got back to be and if a factory reset doesn’t work it’s an new unit

Either way I’ve lost all this years yield maps

 

[Pheasant Surprise]

Looking that way, ams guy just got back to be and if a factory reset doesn’t work it’s an new unit

Either way I’ve lost all this years yield maps

David King may be able to get it working again. Worth a call. The data is very certainly gone though

 

[Phil P]

David King may be able to get it working again. Worth a call. The data is very certainly gone though

Thanks, dealer is going to try a factory reset tomorrow. I’ll see what happens, but I did think about DK, trouble is the turn around time. Still got best part of 500ac of combining and with no yield mapping, autotrack or cameras on the combine I’m not a happy bunny. Slightly devastated about losing all this years date also it’s Sod’s law it was the day I was going to back up everything as well.

 

[Cowboycontracting]

hi, had this same error today, what was the outcome with yours? Did a factor reset do the job?

 

[Phil P]

hi, had this same error today, what was the outcome with yours? Did a factor reset do the job?

Hi, yes dealer did a full reset and reinstalled software, unfortunately lost a lot of field data but cheaper than a new screen! Not had any issues since (touch wood), and I do a backup every couple of days when in use for yield mapping etc.