Guess the parts price thread ?

[daveydiesel1]

So what is the actual price @Clive ?

 

[capfits]

Sun visor for a 2010 subaru forester...
It is no just ag.

 

[Phil P]

Jcb 531/70 control lever got to be replaced as clutch cut out button fell out.after many enquiries it’s a replacement.a snip at £1125.yes you read that correctly
nick...

Have you tried David King Electronics to see if it can be repaired?
Also it’s not a generic leaver is it? have a look on RS components see if they have one.

 

[seedman stains]

higher !

It could be a big night if you play your cards right !!!!!!!!!

 

[quattro]

A jd actuator is £800, a complete turbo with the actuator is £1200 which means the turbo is less than the actuator

£900 for actuator then 2weeks later turbo went, you can only buy turbo c/w actuator from Jcb needed it desperately and couldn’t get from anywhere else for 7 days
so I’ve a brand new actuator if anyone needs one

 

[quattro]

1k

£900

 

[Clive]

So what is the actual price @Clive ?

£400 per each plate - need x 6 of them !
so £ 2400 for rear brakes!

 

[Farmergrum]

i will get started

JCB Loaldall 550-80 rear brake friction plates at 1600hrs


guess the price ?

£541.03

 

[Phil P]

£900 for actuator then 2weeks later turbo went, you can only buy turbo c/w actuator from Jcb needed it desperately and couldn’t get from anywhere else for 7 days
so I’ve a brand new actuator if anyone needs one

I always replace the turbo complete if the actuator fails for that exact reason.
You can’t buy the turbo without the actuator.

 

[Clive]

£541.03

almost ........ but x 6

 

[quattro]

I always replace the turbo complete if the actuator fails for that exact reason.
You can’t buy the turbo without the actuator.

i should av in hindsight, shouldn’t really have needed to at 3500hrs

 

[Farmergrum]

almost ........ but x 6

Part No 12?

 

[Clive]

View attachment 916327

Part No 12?

all the plates in the pack 6 of them apparently

 

[Phil P]

i should av in hindsight, shouldn’t really have needed to at 3500hrs

You’d think for the number of years turbos have been around they would have got them right by now!!!!

 

[milkloss]

£400 per each plate - need x 6 of them !
so £ 2400 for rear brakes!

Did you shop around? That's robbery and almost certainly available cheaper elsewhere.

 

[Farmergrum]

all the plates in the pack 6 of them apparently

Think there is 3 per side... we would be about £150, would need a serial no to confirm...

 

[Pebd99]

£400 per each plate - need x 6 of them !
so £ 2400 for rear brakes!

JCB Brand New Parts 333/D1602 | eBay

Find many great new & used options and get the best deals for JCB Brand New Parts 333/D1602 at the best online prices at eBay! Free delivery for many products!

www.ebay.co.uk

That the ones?

 

[Phil P]

£400 per each plate - need x 6 of them !
so £ 2400 for rear brakes!

Probably a daft question but, do jcb make their own axles? I’d be surprised if the brake discs aren’t made by someone else!

 

[Lewis]

Hand break on my 526-56 is on its last legs, will just about hold itself on a slight incline, and the cable has been shortened to the stop end on the handle in the cab, guess it needs new pads, got me worried how much they could end up being now!

 

[Farma Parma]

Main Belt Tensioner on 6480 Sisu Engine.... eye watering beyond belief.
Put it this way the bearing was whistling so its on its way out so i did the right thing...
Bearings no more than £10 by the way. Oh but you cant just get the bearing from Massey.