- Location
- northumberland
Is there a cheaper option to paying just shy of £2k for a set of injectors for a tier 3 Jcb 536-60 £491.81 each from dealer
JCB shuttle lever for a teletruk £492.29 and 3-5days for delivery, not what you want to hear late on a Tuesday for machine in daily use!Is there a cheaper option to paying just shy of £2k for a set of injectors for a tier 3 Jcb 536-60 £491.81 each from dealer
That's progress, when pencil type injectors for JD 6000 series can be had for£30 each.Is there a cheaper option to paying just shy of £2k for a set of injectors for a tier 3 Jcb 536-60 £491.81 each from dealer
18k?New gearbox for NH T7210 auto command
Same here, I don’t know how un practical People survive especially on marginal places .I remember a fuel forwarding pump for the Sanderson forklift was something like £250. One off eBay for a Ford Fiesta did the job for a tenth of the price.
Dad got a stone in the MF 525 and bent the rasp bars to buggwury. Quoted £800 for a new set. Built himself a press and straightened the old ones for about £20.
If we had to rely on main dealer parts and service we would have been bust years ago.
f**k me, new gearbox for my JD 6910 was 17k without reimbursement for the old one. It is decently dickered then I take it.Keep going up , a lot !!
A fendt wouldnt be as dear for a vario18k?
A friend was quoted 16k for a 9 series including fitting so a t7 210 would be similar size to a 718 so it would be cheaper againThat's what most people say who have never footed the bill for a spanking new cvt.
are we talking about a new casting as well ?New gearbox for NH T7210 auto command
I had a new casting. Funny how "we've never had one of them" turned into "we'll knock 25% off" when I showed them an invoice for someone who had the exact same repair. It wasn't the AC unit that was knackered though.are we talking about a new casting as well ?
I had that pain a few years ago , cutting linseed and frequent reverse unblocking bent all plates on a 9 m header , best part of 4K to replace and as you say basically bent flat plate and a few bits tack welded on.OSR plates for vario header that the combine tried to eat five years ago. About £1100 each and that was for a 6m.
Piece of flat tin with a bit of 1 inch angle tacked to it
28kQuote was for brand new , complete unit to bolt in including casting .
Something had come undone resulting in damaged gears and bearing causing damage to casting as well .
You're still miles out with the quote .
@ACEngineeringIs there a cheaper option to paying just shy of £2k for a set of injectors for a tier 3 Jcb 536-60 £491.81 each from dealer