H&S - Absolutely Speechless

Muddyroads

Member
NFFN Member
Location
Exeter, Devon
I don’t know if he was an employee or the owner/farmers son but had that gone horribly wrong who would have been in the firing line with the hse, I very much doubt they’d take the attitude that most of us on here have, that he was a complete idiot to have done such a thing and that anyone with half a brain cell would have known better. I suspect if the worse had happened, the blame would be pinned on someone else even though they had no idea of what he was up to.

Probably the best bit of health and safety advice I was given was “you can’t afford to employ idiots “
It might not be up to hse’s expectations on safety advice but I nonetheless consider it excellent advice.
“Suitably and adequately trained” are the words that come to mind.
 

kiwi pom

Member
Location
canterbury NZ
Yes, I’m sure you’re right, although the tanker owner might not be aware of the damaged guard, that damage could have been done on the load before that video was filmed for all we know.
I’m glad it’s just a video of stupidity that we’re commenting on, that lad risked his own life doing that
If he's an employee and his boss finds out, they'll have to fire him straight away and whoever filmed it if they work there too. If the HSE find out the employer will be in deep s**t.
Is he an employee though or the farmers son?
What country is it from?
 

Clive

Staff Member
Arable Farmer
Location
Lichfield
If he's an employee and his boss finds out, they'll have to fire him straight away and whoever filmed it if they work there too. If the HSE find out the employer will be in deep s**t.
Is he an employee though or the farmers son?
What country is it from?

without doubt gross misconduct - instant grounds for dismissal in the UK
 

wr.

Member
Livestock Farmer
Location
Breconshire
It's turned my guts.
I saw the result of an incident exactly the same as this. The chap lost his foot. It was still attached by some ligaments and surgeons reattached it but he will always walk with a serious limp. Overalls were wrapped around the shaft with his blood and minced muscle.
 

Drillman

Member
Mixed Farmer
Losing your leg if caught up in a spinning PTO shaft related accident will be nothing compared to been spun around with your head been batted on the implement drawbar ever revolution!
 

Lofty1984

Member
Mixed Farmer
Location
South wales
Losing your leg if caught up in a spinning PTO shaft related accident will be nothing compared to been spun around with your head been batted on the implement drawbar ever revolution!
Indeed someone posted a calculation of how many times your head would hit the drawbar a second if you got caught up bloody frightening
 

Drillman

Member
Mixed Farmer
Indeed someone posted a calculation of how many times your head would hit the drawbar a second if you got caught up bloody frightening
Well at 1000rpm divided by 60 after the first second I doubt you be aware of anything else!

PTO shafts are really best just avoided , my biggest bugbear with them is the poor guarding they still come with.
it’s high time someone conjured up a better idea especially where greasing of UJs are concerned.

Given time and a few more advances in technology and I would think PTO drives will become a thing of the past.

every thing will have leccy motors so just some power plugs to connect and away.
 
Last edited:
Well at 1000rpm divided by 60 after the first second I doubt you be aware of anything else!

PTO shafts are really best just avoided , my biggest bugbear with them is the poor guarding they still come with.
it’s high time someone contoured up a better idea especially where greasing of UJs are concerned.

Given time and a few more advances in technology and I would think PTO drives will become a thing of the past.

every thing will have leccy motors so just some power plugs to connect and away.
Actually I prefer the PTO shafts, I know they’re fekkin dangerous, I can see that with my own eyes, best just stay well away from them.

It will take an awful lot of juice to run some farm machinery with electricity and if something is wrong I won’t be able to see it, touch some part of the machine not remotely connected to the driveline and you could get fried.
 

glasshouse

Member
Location
lothians
Actually I prefer the PTO shafts, I know they’re fekkin dangerous, I can see that with my own eyes, best just stay well away from them.

It will take an awful lot of juice to run some farm machinery with electricity and if something is wrong I won’t be able to see it, touch some part of the machine not remotely connected to the driveline and you could get fried.
Exactly
Pto shafts are perfectly safe if you stay away from them
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 102 41.5%
  • Up to 25%

    Votes: 90 36.6%
  • 25-50%

    Votes: 36 14.6%
  • 50-75%

    Votes: 5 2.0%
  • 75-100%

    Votes: 3 1.2%
  • 100% I’ve had enough of farming!

    Votes: 10 4.1%

May Event: The most profitable farm diversification strategy 2024 - Mobile Data Centres

  • 831
  • 13
With just a internet connection and a plug socket you too can join over 70 farms currently earning up to £1.27 ppkw ~ 201% ROI

Register Here: https://www.eventbrite.com/e/the-mo...2024-mobile-data-centres-tickets-871045770347

Tuesday, May 21 · 10am - 2pm GMT+1

Location: Village Hotel Bury, Rochdale Road, Bury, BL9 7BQ

The Farming Forum has teamed up with the award winning hardware manufacturer Easy Compute to bring you an educational talk about how AI and blockchain technology is helping farmers to diversify their land.

Over the past 7 years, Easy Compute have been working with farmers, agricultural businesses, and renewable energy farms all across the UK to help turn leftover space into mini data centres. With...
Top