Hand Tool Batteries

[JD6230P]

We currently have all dewalt drills etc. However we now would like to get a grease gun (from our research Milwaukee look to be the best) would our dewalt batteries fit the Milwaukee grease gun or would we need to get new Milwaukee batteries?

 

[Lincs Lass]

You might find an adapter to go from dewalt to milwaukee but they certainly wont just fit one to the other

 

[bigg6480]

The dewalt grease gun the every bit as good as the Milwaukee one.

 

[nick...]

Time these batteries were all standardised
nick...

 

[TripleSix]

We currently have all dewalt drills etc. However we now would like to get a grease gun (from our research Milwaukee look to be the best) would our dewalt batteries fit the Milwaukee grease gun or would we need to get new Milwaukee batteries?

DW battery won't fit the Milwaukee.

Grease gun is not power hungry, one 3ah battery will suffice for 3 cartridges.

You can get battery adaptors.

 

[Sid]

Been looking at a battery grinder, they are pricey bits of stuff!!

Is it because they are power hungry ?

 

[Skintagain]

Been looking at a battery grinder, they are pricey bits of stuff!!

Is it because they are power hungry ?

Yes they are. They cut out if you give them too much too.

 

[Sid]

Yes they are. They cut out if you give them too much too.

I wondered if would be better running through an inverter on vehicle battery?

 

[RhysT]

We’ve got a dewalt grease gun. Good tool. Gives me a bit more enthusiasm to do some greasing!

 

[SilliamWhale]

Batteries and the chargers are not dear. Esp lower ah spurious ones

 

[Skintagain]

I wondered if would be better running through an inverter on vehicle battery?

Possibly but I bit of a ball ache.

Battery grinders are good for nipping bolts off etc or padlocks..................

We run generator for 9 inch to cut bigger stuff

 

[Sid]

Possibly but I bit of a ball ache.

Battery grinders are good for nipping bolts off etc or padlocks..................

We run generator for 9 inch to cut bigger stuff

Friend is fed up with snips and side cutters for clearing hedge trimmer .

Said I would look for him.

Wondered if he would be better with a small genny on the tractor somewhere.....or of course avoid the wire!

 

[Skintagain]

Friend is fed up with snips and side cutters for clearing hedge trimmer .

Said I would look for him.

Wondered if he would be better with a small genny on the tractor somewhere.....or of course avoid the wire!

A small battery grinder would be perfect for that job. Milwaukee best you can buy imo. 5 ah batteries.

 

[Sid]

A small battery grinder would be perfect for that job. Milwaukee best you can buy imo. 5 ah batteries.

Milwaukee M18FSAGV115XPDB-502X Angle Grinder 2-18v-5Ah REDLITHIUM Batteries 115mm Disc

M18FSAGV115XPDB-502X Angle Grinder 2 x 18v x 5Ah REDLITHIUM Batteries 115mm Disc Brushless MotorMilwaukee Power Tools

www.powertoolsuk.co.uk

Like that?

 

[Scholsey]

Having had a makita battery grinder for a few years I don’t know how people manage without one.

 

[Rossymons]

Bought a reasonably priced JCB battery grinder 2 years ago.

Perfect for the jobs described above.

 

[Bury the Trash]

Been looking at a battery grinder, they are pricey bits of stuff!!

Is it because they are power hungry ?

yeah but for cutting use 'plasma' type thin discs , about one mm thick

 

[Skintagain]

Milwaukee M18FSAGV115XPDB-502X Angle Grinder 2-18v-5Ah REDLITHIUM Batteries 115mm Disc

M18FSAGV115XPDB-502X Angle Grinder 2 x 18v x 5Ah REDLITHIUM Batteries 115mm Disc Brushless MotorMilwaukee Power Tools

www.powertoolsuk.co.uk

Like that?

Yes I think that’s similar model as what we have

 

[Robt]

Time these batteries were all standardised
nick...

aint never going to happen as who would it benefit?

 

[Frankzy]

aint never going to happen as who would it benefit?

Same were said about phone chargers back in the day, all up until the day the EU told manufacturers to feck off with that kind of pesky tactics...