Header trailer

[Deere 6430]

Wanted a header trailer for an 800 series John `Deere header. Have tried all the breakers but nothing for an 800 series.

the trailer isn’t so imported as are the correct brackets.

many thanks

 

[glasshouse]

Wanted a header trailer for an 800 series John `Deere header. Have tried all the breakers but nothing for an 800 series.

the trailer isn’t so imported as are the correct brackets.

many thanks

Where?

 

[Deere 6430]

Berkshire but will travel for the right trailer or brackets

 

[glasshouse]

Berkshire but will travel for the right trailer or brackets

I have one but in scotland

 

[chaffcutter]

If you want a haulier for it Mike Ponsonby runs up frequently 07733-367570 always looking for back loads

 

[Flat 10]

Theu don't have brackets as such. At least mine doesn't....

 

[Deere 6430]

@Flat 10 any chance of a few photos please as I know what one version looks like, but maybe there is another option for me to explore? I’ve tried three but it doesn’t quite sit right as the knife is movable into two positions which we change regularly.

 

[Flat 10]

@Flat 10 any chance of a few photos please as I know what one version looks like, but maybe there is another option for me to explore? I’ve tried three but it doesn’t quite sit right as the knife is movable into two positions which we change regularly.

You change the knife?!!!! Ours is out and it stays out. Mine basically sits on 3 pads at the front and 2 cups at the back which catch the tube along the back of the header and then its chained down using the fixing points at the rear.

 

[ih1455xl]

When I fitted a 818 header on my 1085 I modified a Massey header trailer just used 2 lengths of channel at a angle with a 6in length welded on the end to stop head sliding back

 

[Chrisw]

I have a header trailer that is surplus to my requirements. Set up for an 818 header. I'm near plymouth.
Has the knife clamps and the chain anchors etc