not as cheap as pananglia but 'malpasonline' is an ordinary modern website order type job, with prompt delivery on stuff ime.
The stops on the L and R of the headstock that limit how far the ram extends when it turns over. Not far from where the lift arms of the tractor attach. They probably screw up and down if that makes senseMany thanks for all the help given previously on this. I'm ploughing with it at the moment, and the plough legs are noticeably not vertical. The Dowdeswell ploughing guide mentions this and says to adjust the "vertical setting bolts". Can someone tell me what/where these are please?
TIA.
The stops on the L and R of the headstock that limit how far the ram extends when it turns over. Not far from where the lift arms of the tractor attach. They probably screw up and down if that makes sense
Not sure? What plough is that? DP7B? If the plough hits the bottom of it when it turns over then yesThanks @Flat 10 . Is it this:
View attachment 869603
I.e. that bolt that's roughly in the centre of the photo? This is looking out the back of the cab.
Not sure? What plough is that? DP7B? If the plough hits the bottom of it when it turns over then yes
Is the ram at the front of the headstock or behind? Mines a D and it’s behind and looks very different to yoursIt's a DP7C. I'm not sure what the difference is between the B/C versions etc.