How can I remove wax from new crankshaft?

[wiffle]

I've bought a new crank for my super major and it's covered in a protective wax. Whenever I've had parts with this in the past it's just peeled off, but this is stuck like sh*t to a blanket! Tried couple of different things like solvent cleaners and degreasers but nothing will touch it.
So, any ideas how to get it off?

 

[Grouse]

Ask the vendor or manufacturer ?

 

[Kevtherev]

Steam cleaner?
Watch it's not in the oil galleries [emoji33]

 

[wiffle]

Ask the vendor or manufacturer ?

Will give the supplier a try.

 

[wiffle]

Steam cleaner?
Watch it's not in the oil galleries [emoji33]

This has crossed my mind...

 

[mushnt grummmble]

Heat it

 

[Mur Huwcun]

Some thinners or petrol will clean it, use airline then to clinically blow it out intill it's cleaner than clean!!!

 

[TheTallGuy]

Sit it in a bath of diesel for an hour or two then use a soft brush to clean it off.

 

[Mursal]

Would have thought cellulose thinners would do the trick?

Heavy copper (4mm square stuff) wire through every oil gallery in the shaft, before you rebuild.
As you know the head gasket can be fitted upside down with no oil going to the rocker shaft in the head.

 

[wiffle]

Thanks for all the ideas, I'll let you know how I get on

 

[8100]

This works on my waxed up oil ways

 

[phillipe]

could try this

 

[wiffle]

could try this

Which should I go for? Perhaps the sensitive...