Hyd vacumn pump and dribble bar,

[fiat 9090]

Hi ,I have a man looking to put a db on a tanker with a hyd pump and I was wondering would it work it's an mxm case 190 with cl c hydraulics

 

[Speedstar]

Hi ,I have a man looking to put a db on a tanker with a hyd pump and I was wondering would it work it's an mxm case 190 with cl c hydraulics

No reason why not

 

[d williams]

Hi ,I have a man looking to put a db on a tanker with a hyd pump and I was wondering would it work it's an mxm case 190 with cl c hydraulics

How wide is dribble bar ?? Macerator numbers ??
Could you go power beyond have you electric spools ??

 

[james ds]

No reason why not

I never seen two spool valves working together constant pumping yet .

 

[Boysground]

Different situation but my sprayer runs with 2 constant pumping spools, both returned through the same line.
More to the point I did look at a hydraulic pump on my tanker and decided that it probably was asking a bit much of the tractor to run pump and the trailing shoe.

Bg

 

[jf850]

Hi ,I have a man looking to put a db on a tanker with a hyd pump and I was wondering would it work it's an mxm case 190 with cl c hydraulics

Neighbour bought a new Belmac 2250 splash plate with hyd drive vac pump in 2015 . Upgraded tractor to a 6713S MF 3 yrs ago .
Due to regs , he needed a dribble bar or trailing shoe . And still wanted hyd drive pump.
They made him a new 2700 gl , voted be 25 or 2600 either, with trailing shoe .

He has a hyd pump on the PTO shaft now , like the older small crop sprayers or hedgecutters had .

 

[Speedstar]

I never seen two spool valves working together constant pumping yet .

You need to buy a fendt or an MF jimmy lad as they can do two spools in constant pumping

 

[james ds]

You need to buy a fendt or an MF jimmy lad as they can do two spools in constant pumping

That’s strange as Valtra have higher output hydraulics than either fendt or Massey.

 

[shumungus]

That’s strange as Valtra have higher output hydraulics than either fendt or Massey.

Have run two spools on constant with a fergie here, no problems.

 

[shumungus]

And may I add 'Holy Jesus' @Speedstar said something positive about a Massey!

 

[fiat 9090]

Neighbour bought a new Belmac 2250 splash plate with hyd drive vac pump in 2015 . Upgraded tractor to a 6713S MF 3 yrs ago .
Due to regs , he needed a dribble bar or trailing shoe . And still wanted hyd drive pump.
They made him a new 2700 gl , voted be 25 or 2600 either, with trailing shoe .

He has a hyd pump on the PTO shaft now , like the older small crop sprayers or hedgecutters had .

I saw where mick did that on a 2700 ,it ran into a good few euro

 

[james ds]

And may I add 'Holy Jesus' @Speedstar said something positive about a Massey!

He only spent £40,000 keeping one Massey going .

 

[mtx.jag]

Hi ,I have a man looking to put a db on a tanker with a hyd pump and I was wondering would it work it's an mxm case 190 with cl c hydraulics

MXM 190 back end ran very hot on a good day,unless it’s a late model with updated cooling it may be to much for it.
I know one I drove didn’t like long haul on road then a spool on constant pump in field,but that was a 53 plate with small oil cooler