Hydraulic Ram Referb

[john432]

Well worth checking out Kramp's website for ram components.. their price for a machined chrome piston rod and even a matching piston doesn't look too bad , and would save time waiting for the machine shops. Just weld the end on or buy a new one and back to work.

 

[mo!]

JG retired.

Noooo, just driven past and wondered if he was still there. Has no one taken over?

 

[Nearly]

Noooo, just driven past and wondered if he was still there. Has no one taken over?

Building flattened.
Landlords building a new range of units down the roadside.

JG is my uncle.

 

[Hawkes]

does anyone know of a good company to just buy the ram seals from ? Preferably with a good website to pick out the ones you want?

 

[fredf]

does anyone know of a good company to just buy the ram seals from ? Preferably with a good website to pick out the ones you want?

FPE Seals in Darlington Tel 01325 282732 They have a Web page they will help.

Tom.

 

[Still Farming]

These are fantastic and if not in stock will make them.

Sealmasters : Specialist suppliers of Oil Seals, Gaskets, O-Rings, Packings

 

[Jeremy B]

does anyone know of a good company to just buy the ram seals from ? Preferably with a good website to pick out the ones you want?

I use Benbrit Engineers at Cheriton Bishop just off the A30 North of Exeter http://www.benbrit.co.uk/

No parts detail on their website but super helpful if you call them. They resealed the main mast ram from my old Bonser forklift, unusual imperial seals and they got them overnight at very reasonable price. They make rams too.

 

[Bumble Bee]

Building flattened.
Landlords building a new range of units down the roadside.

JG is my uncle.

It's sad to see JG go. He's been a godsend to us over the years. Hope he enjoys his retirement.
We have now started using Hydrapower at York. A bit dearer than JG but still do a good job. Worst thing is it's an hour and a half round trip.

 

[Nearly]

It's sad to see JG go. He's been a godsend to us over the years. Hope he enjoys his retirement.
We have now started using Hydrapower at York. A bit dearer than JG but still do a good job. Worst thing is it's an hour and a half round trip.

Any fasterthan JG?

 

[mo!]

Any fasterthan JG?

Not much...

 

[TripleSix]

It's sad to see JG go. He's been a godsend to us over the years. Hope he enjoys his retirement.
We have now started using Hydrapower at York. A bit dearer than JG but still do a good job. Worst thing is it's an hour and a half round trip.

Always amazes me how much stuff they have in there at Hydrapower, they've never failed me yet.

Shame they're in the middle of nowhere!

 

[H200GT]

These are fantastic and if not in stock will make them.

Sealmasters : Specialist suppliers of Oil Seals, Gaskets, O-Rings, Packings

+1 for sealmasters in Cardiff, nothing they haven’t got for me in the past.

just pop the old ones in the post and they will send the new back

 

[YELROM]

@RLC who did you end up using?
We have a ram that could do with a new rod and resealing

 

[prop13]

@RLC who did you end up using?
We have a ram that could do with a new rod and resealing

 

[prop13]

Abco at Southwell Nott's always helpful

 

[BlueBrick81]

Abco at Southwell Nott's always helpful

You must be local??.. But I have to agree^^ Just had a new rod and seals for the telehandler tilt ram done at Abco, cant remember the exact price had change from £200.