Switch comes as part of a switch kit, which includes all the wiring and speed switch and Bluetooth if it's a onekey modelJust got ours back from Sinclairs after it wouldn’t change direction with the switch, for some reason they said it wasn’t under warranty as nit been registeredstrange how everything else I got at same time had been but not that
so cost about £100 to fix
Idiots guide to Milwaukee.....
- Thread starter simmy_bull
- Start date
- Location
- North West Wales
I’ve been looking at switches for one at work, as you say they’re an unit and quite a pricey unit. But anyhow, not to worry, someone else has sorted the problem and ordered a new one! A flipping Makita one, half the power and old generation with 5amp batteries for double the price of a bare high torque new one!! we had batteries and chargers etc!!
ACEngineering
Member
- Location
- Oxon
mine is more a mechanical problem with the f/r slide switch. switch sticks out more on the reverse side than the forward side, its more or less below the body on the forward side so you cant just knock it across easy.
- Location
- North West Wales
Was going to order a leaf blower on Friday but failed to get around to it in the end!! Was going to click the order button this morning on the window that was still open from Friday, price gone from £110+vat to £132+vat doh!! 
tomlad
Member
- Location
- nr. preston
È
SilliamWhale
Member
Was going to order a leaf blower on Friday but failed to get around to it in the end!! Was going to click the order button this morning on the window that was still open from Friday, price gone from £110+vat to £132+vat doh!!
£118 on powertoolmate
- Location
- North West Wales
Yes found it this morning and ordered it asap!! The price increase was on powertooluk. SGS not in stoc
- Location
- South wales
Right then collective my grease gun has started playing up it squeaks when pumping started off of it was a tight nipple but now is doing it all the time any ideas? I stupidly After struggling to register it forgot to Re try so no help sending it off, I’m wondering if it’s the brushes??
ACEngineering
Member
- Location
- Oxon
Its probably the plastic gears in them? That's what often goes wrong I think.
Speak to c j Sinclair or get on facebook and message kyle Guy.
- Location
- North West Wales
Well no leaf will be safe from now on....
Ordered yesterday and delivered this Morning, only had a 4amp battery to try it out. Was not a full battery and on the low setting cleared the concrete all around the house and some leaves off the lawn!!
Ordered yesterday and delivered this Morning, only had a 4amp battery to try it out. Was not a full battery and on the low setting cleared the concrete all around the house and some leaves off the lawn!!
Is there any difference between the 12v M12FRAIWF12-0 and 18v M18BRAIW-0 right angle ratchet wrenches? Apart from batteries before someone says it! Which is better?
I think one would be useful for wheel and disc changing where we cannot get at the studs with the impact we have(18v)
J
I think one would be useful for wheel and disc changing where we cannot get at the studs with the impact we have(18v)
J
Hedge cutting kit
Grouse
Member
Just a quick update on this and a thank you to ACEngineering - did as you advised and it was picked up, repaired and returned in the week FOC. Dodgy contact on the trigger - thank you !
ACEngineering
Member
- Location
- Oxon
JohnGalway
Member
- Location
- Connemara, Ireland
ACEngineering
Member
- Location
- Oxon
Some of us like to keep stuff clean and tidy.
Brake cleaner in 25litres is cheap and so are rags.
Tomr10
Member
Occasionally my day job there spotless but had a second attempt at fitting a tow bar to my car todayI expect that you clean your hands from time to time
And eventually success
