Ifor Williams flooring

[sclb]

I need to re-floor my flatbed trailer. What are the wood sheets called and where do I get it from? Similarly, the large headed "tek" screws to fasten it down. Thanks

 

[Nearly]

Buffalo board.

 

[Macsky]

Some marine ply and a sheet of alu checker plate, never need to worry again?

 

[Lincs Lass]

Philonic ply .

 

[Lincs Lass]

Some marine ply and a sheet of alu checker plate, never need to worry again?

That's what the tippers have .
3/4 ply with ally over .
The floor can take some abuse along as the ally doesn't get damaged

 

[HallFarmBill]

I did mine recently using 18mm sheets of this

https://monkroyds.com/streply-black-hexagon-1-sidesmooth-reverse-phenol-faced-plywood-3135-p.asp

Screwed on with these

https://www.toolstation.com/techfast-light-duty-self-drilling-torx-roof-screw/p80217

 

[Mounty]

Philonic ply .

I think that should be phenolic

 

[steveR]

I need to re-floor my flatbed trailer. What are the wood sheets called and where do I get it from? Similarly, the large headed "tek" screws to fasten it down. Thanks

Screwfix.

 

[Kidds]

I need to re-floor my flatbed trailer. What are the wood sheets called and where do I get it from? Similarly, the large headed "tek" screws to fasten it down. Thanks

It is worth asking an Ifor dealer as they then come to the correct size.
Otherwise use Buffalo board, having used others in the past I would only use Buffalo board or what an Ifor dealer will supply. Cheaper stuff delaminates in no time.

 

[smcapstick]

Phenolic ply.

Every other builder’s supply / timber merchant keeps it. Don’t forget to seal around the edges and joints with CT1.

 

[Horn&corn]

I did mine recently using 18mm sheets of this

https://monkroyds.com/streply-black-hexagon-1-sidesmooth-reverse-phenol-faced-plywood-3135-p.asp

Screwed on with these

https://www.toolstation.com/techfast-light-duty-self-drilling-torx-roof-screw/p80217

That’s the correct type of tek screw. Needs these wings to cut a slightly bigger hole in timber to pull it down tight