IH 1455xl PTO

[William 1455xl]

Hi everyone , just wondered if anyone happened to know how to reverse the pto shaft end on an international harvester 1455 , as iv had a somewhat read of both service manual and operators manual and it doesnt seem to meantion the matter in either , there doesnt seem to be a cerclip just two holes parallel to each other on either side of the shaft possibly for a key?

Thanks [emoji1]

 

[SuperTwo]

Hi everyone , just wondered if anyone happened to know how to reverse the pto shaft end on an international harvester 1455 , as iv had a somewhat read of both service manual and operators manual and it doesnt seem to meantion the matter in either , there doesnt seem to be a cerclip just two holes parallel to each other on either side of the shaft possibly for a key?

Thanks [emoji1]

Theres only a 21 spline shaft as far as i know

 

[William 1455xl]

Theres only a 21 spline shaft as far as i know

Mmm however i have the 540 and 1000 options in the cab?

 

[SuperTwo]

Would make sence however i have the 540 and 1000 options in the cab?

The two speeds go through the same shaft.

 

[William 1455xl]

The two speeds go through the same shaft.

Agreed . Which lead me to believe the shaft would be reversible or interchangeable?

 

[essexpete]

Perhaps you have to use an adaptor?

 

[William 1455xl]

Could do [emoji848]
, thanks for the imput i will see what i can find

 

[deere66]

Theres only a 21 spline shaft as far as i know

That's when horses were horses, don't expect IH thought anyone would want to put a haybob on one

 

[Exfarmer]

if you go on the Case website you can see an exploded diagram of the PTO
sadly it only shows a single ended 21 spline shaft
( do not be put off by compact tractor the Americans have different terms to us)
When these tractors were sold the standard was for tractors over 100 HP had 21 spline shafts 1000RPM outputs to stop people putting small equipment on

 

[William 1455xl]

That's when horses were horses, don't expect IH thought anyone would want to put a haybob on one

Haha agreed however the 1000 shaft has worn away so the ball catch no longer catches [emoji51], and whilst i was on the matter wondered how easy it would be to fix eg just take the reversable end out etc

 

[William 1455xl]

if you go on the Case website you can see an exploded diagram of the PTO
sadly it only shows a single ended 21 spline shaft
( do not be put off by compact tractor the Americans have different terms to us)
When these tractors were sold the standard was for tractors over 100 HP had 21 spline shafts 1000RPM outputs to stop people putting small equipment on

Yes i can see why , she has got a fair bit of grunt about her , thanks for the info really helpful [emoji1] , just wondered as the what the holes were eitherside possibly for a revesable end and if so it would of been a bonus haha

 

[SuperTwo]

Haha agreed however the 1000 shaft has worn away so the ball catch no longer catches [emoji51], and whilst i was on the matter wondered how easy it would be to fix eg just take the reversable end out etc

Must have big hours on her to have that much wear!

 

[William 1455xl]

Must have big hours on her to have that much wear!

Haha well shes done a fair ammount of powerharrowing in her time had her scince 1981 if Im correct

 

[deere66]

if you go on the Case website you can see an exploded diagram of the PTO
sadly it only shows a single ended 21 spline shaft
( do not be put off by compact tractor the Americans have different terms to us)
When these tractors were sold the standard was for tractors over 100 HP had 21 spline shafts 1000RPM outputs to stop people putting small equipment on

Which Case website was that? I looked at CNH parts and it couldn't find a 1455

 

[Exfarmer]

here is the link to the PTO page
https://partstore.caseih.com/us/parts-search.html#epc::mr52333ar397522
When searching you need to put in
IH 1455 Tractor

 

[deere66]

here is the link to the PTO page
https://partstore.caseih.com/us/parts-search.html#epc::mr52333ar397522
When searching you need to put in
IH 1455 Tractor

Thanks. I tried 1255 and all that came up were some windrowers

 

[deere66]

here is the link to the PTO page
https://partstore.caseih.com/us/parts-search.html#epc::mr52333ar397522
When searching you need to put in
IH 1455 Tractor

Unless i'm mistaken, that link for a compact tractor is nothing like a 1455. The brakes are different, mounted on the diff with bull gear reductions, the engine is a 3cyl and the 4wd front axle is more like a Belarus

 

[SuperTwo]

Think thats the American case ih website.
Try this link here.
https://ngpc.cnh.com/Lp/es/ds?dealerhash=877D0F77-9657-42F5-846F-FDBC8E66B3FD

 

[deere66]

Think thats the American case ih website.
Try this link here.
https://ngpc.cnh.com/Lp/es/ds?dealerhash=877D0F77-9657-42F5-846F-FDBC8E66B3FD

Thanks, that's a great find.

https://ngpc.cnh.com/CStoneEPC/launch.sls?csreqid=6491dbc2-2d46-4b5e-b904-9581c6000b15&locale=en

This shows 2 different PTO shafts, i presume i is 6 spline and t'other 21 but it'll be a big job changing them.

 

[Exfarmer]

I am sorry, I had the page yesterday, but I cannot find it today. The link I put is wrong, apologies. I will have another go