Intelliview 4 gps

[robin banks]

Have a intelliview 4 and am getting tractor software loaded so I can use it for GPS. What kind of antenna can/should I use with this. Was thinking of something like an ag 15 or a cheaper version of these.
What are these monitors capable of accuracy wise

 

[PJ Walker @ RTK Farming]

An intelliview 4 is capable of accuracy upto RTK level. Normally these are paired with a Trimble 372 receiver which have software specific to them. They can also be used at a basic accuracy level and upgraded to higher accuracies. As far as I can remember an ag15 is usually paired with a Trimble 250 screen so not sure that would work for you.

 

[Northern farmer]

Who took care of the software for your screen and did not give any further guidance on the selection of the GNSS receiver and antenna?

Trimble has confused us when moving from screens with an integrated GNSS receiver to separate screens and GNSS receivers that have the antenna and steering control integrated together (like most other brands have done a long time).

As above, the AG-15 is "just an antenna", you need a GNSS receiver to "use your screen with GPS".

 

[GPS_Support_2014]

AnY GPS receiver which can output NMEA will operate with the display.