I went to see the tyre fitting company to see the three makes of tyres he had offered me for my 390 on 16.9 x 34,
MRL, CEAT, & Vredestein, just for piece of mind, not that I would be able to judge quality and wear by there visual appearance.
Well, they were very much the same, the real only difference was the diameter! this varied quite a bit! I am not sure of the Max & Min tolerances, yet I do know that 25mm difference in diameter will give you approximately 75mm rolling diameter difference! is this a concern when fitting a set of rear or front tyres?
MRL, CEAT, & Vredestein, just for piece of mind, not that I would be able to judge quality and wear by there visual appearance.
Well, they were very much the same, the real only difference was the diameter! this varied quite a bit! I am not sure of the Max & Min tolerances, yet I do know that 25mm difference in diameter will give you approximately 75mm rolling diameter difference! is this a concern when fitting a set of rear or front tyres?