Irrigation pull out bar

[graham mc]

Seen some that have hydraulic connections to save jumping back into tractor after connecting up. Any pictures on how this is plumbed up please? Just trying to make it a bit easier that's all

 

[Robt]

It’s just a male hose that plugs into spool valve then a female socket in the bar. It ain’t rocket science.....

 

[graham mc]

It’s just a male hose that plugs into spool valve then a female socket in the bar. It ain’t rocket science.....

thanks for that advice very helpful
I will try explain a bit more
I want to be able to back up to the machine put the spool in pump jump out connect pipes and use hydraulics. Not rocket science I know but needs a way of dumping oil back to tractor without pressurising the ends before I plug in pipes

any part time farmers/ rocket scientists out there help????

 

[Will 1594]

thanks for that advice very helpful
I will try explain a bit more
I want to be able to back up to the machine put the spool in pump jump out connect pipes and use hydraulics. Not rocket science I know but needs a way of dumping oil back to tractor without pressurising the ends before I plug in pipes

any part time farmers/ rocket scientists out there help????

Will take you a pic in morning ,quite simple really , can you remember the old bale slave valve you would have on an old loader ,
You need a return back to tractor , ,plug irrigator return to this ,
Pressure pipe from tractor spool to a two way tap , one inlet two outlets , female qr coupling on one ,and pipe back into spool on other one ,set spool going lever one way ,oil just goes round back into spool , turn tap oil goes out of qr coupling into irritator ,, and returns on its dedicated return
If you follow ,
Put cable tie on pressure pipe ,

 

[Robt]

thanks for that advice very helpful
I will try explain a bit more
I want to be able to back up to the machine put the spool in pump jump out connect pipes and use hydraulics. Not rocket science I know but needs a way of dumping oil back to tractor without pressurising the ends before I plug in pipes

any part time farmers/ rocket scientists out there help????

Well why didn’t you say! You will need a couple of remote valves . Best bet is talk to your local hydraulic suppliers they will knock you something up

 

[Will 1594]

Well why didn’t you say! You will need a couple of remote valves . Best bet is talk to your local hydraulic suppliers they will knock you something up

Just need one of these roberto ,and some hoses made up a few fittings ,

 

[Will 1594]

Qfb

 

[Exfarmer]

It may sound silly, but when I bought my first hydraulic actuated irrigator, i got so seriously peed off with the spool jumping out, in and out of the tractor like a yo yo, I quickly had a manual pump fitted And never regretted it. However it did not have hydraulic table turning

 

[Matt L]

thanks for that advice very helpful
I will try explain a bit more
I want to be able to back up to the machine put the spool in pump jump out connect pipes and use hydraulics. Not rocket science I know but needs a way of dumping oil back to tractor without pressurising the ends before I plug in pipes

any part time farmers/ rocket scientists out there help????

Exactly as @Robt said but a pair of pipes.
Put the spool in constant pump and connect the return side first. When you take it of take off the pressure side first.
Always worked fine that way on a NH I had a long time ago.