Netherfield
Member
- Location
- West Yorkshire
What thread is it?
From looking at the pictures yes as there is no nut at the other side.Is the hole threaded like ?
What would 2 ratchets gain? A ring spanner on one side whilst swinging both through max arc would achieve the same result.Maybe just a ratchet spanner on each side would speed things up. Still manual but the bolts aren't that long.
So are they all out now?Threaded hole, all needed replaced this time rather than just turned.
So are they all out now?
Or a spanner and lots of elbow grease.......needs a gadget to do it.