Is this belt knackered

[bobk]

 

[davidroberts30]

not quite

 

[chipchap]

….But nearly

 

[bobk]

Ha ha , any reccs for a good supplier of reasonably priced belts ?

 

[Henarar]

Ha ha , any reccs for a good supplier of reasonably priced belts ?

vulcanising south west

 

[Pieces_of_Eight]

What machine is it on?

 

[yoki]

Yes.

But just like humans, even a knackered one can still do a pretty decent job for a good while.

It's just that you can never quite be sure when it's going to snap!

 

[norse]

Ha ha , any reccs for a good supplier of reasonably priced belts ?

Beltflex LTD

Baler belts Feeder wagon belts Power flow belts Logging belts etc.. Rubber ply, grip top, fabric back, PVC, chevron, cleated. Made to order give us the dimensions and leave it to us, quick service...

www.facebook.com

 

[bobk]

What machine is it on?

NH 644
Only baling hay and straw

 

[davidroberts30]

Yes.

But just like humans, even a knackered one can still do a pretty decent job for a good while.

It's just that you can never quite be sure when it's going to snap!

Like me

 

[neilo]

Do you feel lucky?

 

[bobk]

Belt tech £229 tech belt .
Belt flex £340

wtf

 

[Henarar]

Belt tech £229
Belt flex £340

wtf

There is a lot of difference in spec

 

[bobk]

There is a lot of difference in spec

He just emailed , belt flex was £240 , both 3 ply mato joiners

 

[Rnold]

You need a belt joining tool so you can cut the joint out and replace with a short length of belt and two joints..

 

[livestock 1]

As above you need some clips and a belt joining tool cut a bit out and put a bit in with two joiners with the belt cut to the correct length

 

[livestock 1]

This was the one I used the most but have had some stronger ones lately

 

[livestock 1]

 

[bobk]

This was the one I used the most but have had some stronger ones lately

There's 3 joins in the belt already

 

[Henarar]

There's 3 joins in the belt already

they are meant to be endless