Isobus harness to non isobus tractor

Syngenta

Member
Arable Farmer
Hi,
I have non isobus tractor with trimble gfx 750
And i want to plug my isobus spreader to gfx750 with isomatch power cable which makes 9 pin out in the cab and another cable from gfx to 9 pin. Is it going to work.
 

Syngenta

Member
Arable Farmer
I didint bought anything yet. Because trimble gave scary price and i then started for research. I heard that isomatch displays came with isobus harnes in the box but my trimble didnt had one.
 

drifter

Member
BASIS
As @Robt says yes it will work with the right cable. I once did this on a 7920 John Deere with a CLAAS crop sensor. Was quite amuzine to see the CLAAS logo appear on the greenstar.
Check with Trimble as their cables are fairly specific.
 

Syngenta

Member
Arable Farmer

SinisaB

Member
Location
Earth
I didint bought anything yet. Because trimble gave scary price and i then started for research. I heard that isomatch displays came with isobus harnes in the box but my trimble didnt had one.
What scary price have you got? Do you have only display & nav900 or you have automated steering? Of course that you can use isomatch harness but you have to adjust it to GFX750. You gonna need also cable with 2 relays in order not to drain your battery. So, if you don't know how to sort it out, this game could cost you a lot.
 

Syngenta

Member
Arable Farmer
Yes i saw that iaomatch harness has kill switch box with 9 pin out and 9 pin to trimbleish cable. i have ez pilot pro attached to nav 900 and gfx750.
 

Syngenta

Member
Arable Farmer
Our neighbors had the same but they use the switch for twin isobus main+front tank isobus.
 

Attachments

  • Screenshot_20200124-181324.png
    Screenshot_20200124-181324.png
    235.3 KB · Views: 0
  • _20200124_173801.JPG
    _20200124_173801.JPG
    110.2 KB · Views: 0

Syngenta

Member
Arable Farmer
The problem is trimble gave me 1300 eur without tc code, kverneland told me somewhere 350~400 euro + 146 euro for trimbles proprietary display to 9 pin. Almost 900 euros which is tc code + vra code Both.
Why i not save this money for something which i already gona buy.
 

SinisaB

Member
Location
Earth
The problem is trimble gave me 1300 eur without tc code, kverneland told me somewhere 350~400 euro + 146 euro for trimbles proprietary display to 9 pin. Almost 900 euros which is tc code + vra code Both.
Why i not save this money for something which i already gona buy.
I have to agree with you! 1300 is to much. Here is a 980 eur. Mueller has also isobus harness, similar to kverneland. Ask them also, if you have a dealer in your country.
 

Is Red tractor detrimental to your mental health?

  • Yes, Red tractor increase my stress and anxiety

    Votes: 283 98.3%
  • No, Red tractor gives me peace of mind that the product I produce is safe to enter the food chain

    Votes: 5 1.7%

HSENI names new farm safety champions

  • 117
  • 0
Written by William Kellett from Agriland

Farm-safety-640x360.png
The Health and Safety Executive for Northern Ireland (HSENI) alongside the Farm Safety Partnership (FSP), has named new farm safety champions and commended the outstanding work on farm safety that has been carried out in the farming community in the last 20 years.

Two of these champions are Malcom Downey, retired principal inspector for the Agri/Food team in HSENI and Harry Sinclair, current chair of the Farm Safety Partnership and former president of the Ulster Farmers’ Union (UFU).

Improving farm safety is the key aim of HSENI’s and the FSP’s work and...
Top