Isobus harness to non isobus tractor

[Syngenta]

Hi,
I have non isobus tractor with trimble gfx 750
And i want to plug my isobus spreader to gfx750 with isomatch power cable which makes 9 pin out in the cab and another cable from gfx to 9 pin. Is it going to work.

 

[Robt]

yes, if the cable is built correct then it will be fine. Have you bought an iso vehicle harness?

 

[Syngenta]

I didint bought anything yet. Because trimble gave scary price and i then started for research. I heard that isomatch displays came with isobus harnes in the box but my trimble didnt had one.

 

[drifter]

As @Robt says yes it will work with the right cable. I once did this on a 7920 John Deere with a CLAAS crop sensor. Was quite amuzine to see the CLAAS logo appear on the greenstar.
Check with Trimble as their cables are fairly specific.

 

[Syngenta]

Ukrfarming — Кабель живлення GFX-750/XCN-1050, роз'єм ISO, CAN, питание, 2,5 м(пр-во CNHI)

Ukrfarming LLC — Official distributor of Case IH, Lemken, Gaspardo in Ukraine

ukr.farm

Kongskilde Kabelboom Isobus trekker - 200062853 - Techniekwebshop.nl

Kongskilde Kabelboom Isobus trekker - 200062853 | Aant.1 in Landbouw / Zaaitechniek / Zoeken op merk en model / Kongskilde / Aeromat 12-16 RHG / Bouwjaar -> 2011

www.techniekwebshop.nl

 

[Syngenta]

I want to use these two cables to use iso-tc from gfx 750 to kverneland geospread

 

[SinisaB]

I didint bought anything yet. Because trimble gave scary price and i then started for research. I heard that isomatch displays came with isobus harnes in the box but my trimble didnt had one.

What scary price have you got? Do you have only display & nav900 or you have automated steering? Of course that you can use isomatch harness but you have to adjust it to GFX750. You gonna need also cable with 2 relays in order not to drain your battery. So, if you don't know how to sort it out, this game could cost you a lot.

 

[Syngenta]

Yes i saw that iaomatch harness has kill switch box with 9 pin out and 9 pin to trimbleish cable. i have ez pilot pro attached to nav 900 and gfx750.

 

[Syngenta]

Our neighbors had the same but they use the switch for twin isobus main+front tank isobus.

 

[SinisaB]

Our neighbors had the same but they use the switch for twin isobus main+front tank isobus.

Yes, you're right! You could use this without any problem. What is the kverneland price?

 

[Syngenta]

The problem is trimble gave me 1300 eur without tc code, kverneland told me somewhere 350~400 euro + 146 euro for trimbles proprietary display to 9 pin. Almost 900 euros which is tc code + vra code Both.
Why i not save this money for something which i already gona buy.

 

[SinisaB]

The problem is trimble gave me 1300 eur without tc code, kverneland told me somewhere 350~400 euro + 146 euro for trimbles proprietary display to 9 pin. Almost 900 euros which is tc code + vra code Both.
Why i not save this money for something which i already gona buy.

I have to agree with you! 1300 is to much. Here is a 980 eur. Mueller has also isobus harness, similar to kverneland. Ask them also, if you have a dealer in your country.

 

[ih1455xl]

I want to use these two cables to use iso-tc from gfx 750 to kverneland geospread

Did this work ok

 

[Syngenta]

I haven't bought them

 

[ih1455xl]

I haven't bought them

Have you managed to get a isobus harness

 

[Syngenta]

I am using isobus on steyr profi but it is integrated and works perfectly for vra and section control