jcb 414 no steering

vinnie123

Member
Location
dorset
We had it on a 419 recently after a pipe blowing and it was a tiny piece of sh!t inside the valve block located in 5he front end above axle . I seem to remember it being on back right corner of that block when stood in front of machine
 

vinnie123

Member
Location
dorset
i didnt do much inve

I that tomorrow Vinnie.
The block behind this plate was where we luckily found a foreign body . It was one of the ports on the right hand side that had the smallest bit of rubber stuck in it .
 

Attachments

  • 46F4B6E9-A885-4BC4-8A88-3C1DC6B1077D.jpeg
    46F4B6E9-A885-4BC4-8A88-3C1DC6B1077D.jpeg
    293.1 KB · Views: 0

Joeblue

Member
The block behind this plate was where weluckily found a foreign body . It was one of the ports on the right hand side that had the smallest bit of rubber stuck in it .
It was the orbital unit mechanic says it was worn and no grip on steering shaft so .new one going in.Dont think steering shaft is too hot either but think it will be ok
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.0%
  • Up to 25%

    Votes: 66 35.1%
  • 25-50%

    Votes: 30 16.0%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,292
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top