jcb 520 problem

suma

Member
hi i have just fitted a repacement borg warner shuttle box in to my teleporter,everything works but i carnt seem to get the dump clutch to work. anybody know what to do???
 

suma

Member
yes the shuttle works .but you carnt change from 1st 2nd 3rd with the engine running. but you can without it running. it may be that the dump valve is stuck. this shuttle box came of a scrapper so its been stood for a while. i hope to have a look at the d/valve this weekend
 

essexpete

Member
Location
Essex
Well i should think there is a fair chance the spool is not being moved by linkage after refit. Important that the machine is not operated with the dump partially opened as this will lead to premature clutch wear. I was told years ago that the early shuttles suffered problems with drivers feathering when a mechanical linkage was used rather than electric solenoid. As long as its driving OK a temporary solution is merely to knock it out of forward when changing gear.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.5%
  • Up to 25%

    Votes: 65 34.9%
  • 25-50%

    Votes: 30 16.1%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 6 3.2%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,287
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top