Jcb 536 agri

[Lukas2]

Hello
I have the front axel locked !
I can’t turn right or left Only if I push the wheels up It works!!!!
While driving also sometimes works.
-Front sensor and back sensor are new .
-steering valve is new
- all fuses are ok
Any ideas ?

 

[v8willy]

Had the steering go solid on the Merlo once, I was working at it & had knocked the steering mode lever between 2 positions.

 

[Planttech]

Hello
I have the front axel locked !
I can’t turn right or left Only if I push the wheels up It works!!!!
While driving also sometimes works.
-Front sensor and back sensor are new .
-steering valve is new
- all fuses are ok
Any ideas ?

Does it work if you operate the hydraulics?
Also what machine

 

[melted welly]

Hello
I have the front axel locked !
I can’t turn right or left Only if I push the wheels up It works!!!!
While driving also sometimes works.
-Front sensor and back sensor are new .
-steering valve is new
- all fuses are ok
Any ideas ?

steering ram seals

 

[Hfd Cattle]

Does it work if you operate the hydraulics?
Also what machine

The title says JCB 536 Agri so I assume that's the nachine he is talking about

 

[Lukas2]

Every thing is working fine only front wheels blocked .
almost we know the problem .. the New valve is not working properly . It pushes oil in two directions from the left and the right so the pressure goest to the wheels from 2 sides ! So it stops . Today I wait for a new original valve I hope it will work .
The company took the NEW valve to check . So I wait for money back from them but that won’t be easy cause they say that their valve is ok! !