Hi ALL just joined the site, Im selling Jcb Aftermarket parts filters, cables, pumps thought id share this with you all.
Jcb Parts
- Thread starter chrisbeardaps
- Start date
Timbo
Member
- Location
- Gods County
Can you post in the Machinery For Sale page maybe ? This will get lost after afew days.
JCB 530/70, Would you have a price for the air con filter that goes on the outside between bottom of cab and boom, it's a little cardboard box with a paper element, had a price from JCB and fell off the chair
Hi there yes if you look on the website under air con filters they are all there
Whats the Web address?
Timbo
Member
- Location
- Gods County
15 quid ebay.
- Location
- East Sussex
Just the man!
ive got one of these and the rubber has gone off the arrowed button. The peg that just pokes out can be operated but not easily with your thumb and we have lost the metal spring plate that goes between the button and the rubber.
can you advise any replacement button without spending a grand and a bit?
ACEngineering
Member
- Location
- Oxon
Its almost guaranteed I get a phone call at least once a week for these! Joystick maker wont sell any parts separately. There is a hard plastic push button i have heard of people using but not done it myself yet.
- Location
- East Sussex
yeh...... I was testing the new boy!
ACEngineering
Member
- Location
- Oxon
- Location
- East Sussex
Bonza! I've got some of those....... they fit the controller for the lucasG bedder.
ACEngineering
Member
- Location
- Oxon
Give umm a go then
i dont know how well sealed they are as there is no cover so might get full of muck but worth a try to save a grand.
- Location
- East Sussex
They're waterproof, sealed under the hard button...Give umm a go then
fermerboy
Member
- Location
- Banffshire
Well done chaps, my 526-56 button fell to bits last week and I was wondering what to do to fix it, and I believe it or not have a spare one of those RS switches on the shelf from wiring my tractor autosteer up.
Will investigate if I can get the old fella to stop using the loadall long enough.
Thank you!!
- Location
- Northumberland
How are they? I've replaced a few of the originals with ebay jobs but some need doing again. It's getting a bit of a mess in behind, so it would be good not to revisit.
- Location
- East Sussex
be a while before I get to the joystick button but on the lucas controller they seem grand. Replaced two so far.... need soldering on though. I think official buttons were£15 or so, could be wrong.
- Location
- northumberland
How much for a set of injectors for a 12plate tier 3 536-60
Hi I would need the machine serial number
You can also look on my website
You can also look on my website