Jcb tm 310 low on power

[eomachinery]

Hi all we currently have a 2009 jcb tm310, it is slowly getting more sluggish on the road, it is now very gutless to the point where it cant get to 6th on a very slight slope.

It is a 6 speed machine, all gears work fine and it doesnt seem to be binding in any way as it rolls freely in neutral, its had a recent full service. The electric lift pump/filter housing was bypassed before we got the machine, so it only has an inline filter and the normal secondary filter, the air filters are clean and the turbo is all good. There are no error codes on the machine.
Are there any commons issues with these machines/engines we can look into? Any info greatly appreciated.

Many thanks.

 

[agrimax]

So does it not now have an electric lift pump in the system at all?

 

[rusty]

I had a 320s with a variable geometry turbo and the actuator packed up resulting in low top end power.

 

[Timbo]

Hi all we currently have a 2009 jcb tm310, it is slowly getting more sluggish on the road, it is now very gutless to the point where it cant get to 6th on a very slight slope.

It is a 6 speed machine, all gears work fine and it doesnt seem to be binding in any way as it rolls freely in neutral, its had a recent full service. The electric lift pump/filter housing was bypassed before we got the machine, so it only has an inline filter and the normal secondary filter, the air filters are clean and the turbo is all good. There are no error codes on the machine.
Are there any commons issues with these machines/engines we can look into? Any info greatly appreciated.

Many thanks.

So this will have the Perkinsesque Delphi injection pump ??

 

[ACEngineering]

So this will have the Perkinsesque Delphi injection pump ??

No it wont, all TM320 were jcb common rail engine not perky.

 

[Pan mixer]

Inter cooler pipe come off?

 

[davidroberts30]

Inter cooler pipe come off?

I've had a few split on the 310

 

[davidroberts30]

Hi all we currently have a 2009 jcb tm310, it is slowly getting more sluggish on the road, it is now very gutless to the point where it cant get to 6th on a very slight slope.

It is a 6 speed machine, all gears work fine and it doesnt seem to be binding in any way as it rolls freely in neutral, its had a recent full service. The electric lift pump/filter housing was bypassed before we got the machine, so it only has an inline filter and the normal secondary filter, the air filters are clean and the turbo is all good. There are no error codes on the machine.
Are there any commons issues with these machines/engines we can look into? Any info greatly appreciated.

Many thanks.

Change the secondary filter?
It will be quite fine so wont take much to stop it

 

[milkloss]

Change the secondary filter?
It will be quite fine so wont take much to stop it

Agree. It's my understanding that the primary filter is pretty fine too and may be the cause of the electric lift pump having a short lifespan.