Jcb transmission oil pressure low

[Northeastfarmer]

hi all, got a jcb 530/70 and the transmission oil pressure low warning with highly irritating buzzer is going off constantly, even after you've revved it up! Oil has been changed along with filter and levels are correct.....is it a case that the sensor has gone? If so where abouts is it please....many thanks

 

[ACEngineering]

Could be sensor but could just as easy be worn out clutch packs and pump. You will need it pressure testing to find out.

 

[Northeastfarmer]

Could be sensor but could just as easy be worn out clutch packs and pump. You will need it pressure testing to find out.

Everything appears to be working fine....would it still be if any of what you mentioned had worn out?

 

[ACEngineering]

Everything appears to be working fine....would it still be if any of what you mentioned had worn out?

Could be. Think they need 90 psi or so to make the light go out? Correct pressure is approx 160psi but they will still drive on 90 psi any less though and its a quick road to slipping burnt out packs.
Had customer with a tm300 that when hot and at idle the trans light came on. It was just getting tired and old, it was quickly traded in for a new machine while it was okay when first started

Like i said you need it pressure tested to find out whats really going on.

 

[Northeastfarmer]

Could be. Think they need 90 psi or so to make the light go out? Correct pressure is approx 160psi but they will still drive on 90 psi any less though and its a quick road to slipping burnt out packs.
Had customer with a tm300 that when hot and at idle the trans light came on. It was just getting tired and old, it was quickly traded in for a new machine while it was okay when first started

Like i said you need it pressure tested to find out whats really going on.

Ok thanks ace I'll make some enquiries next week