JCB wiring plugs

Anyone know where I could get some of these wiring plugs.
Their off a 2001 JCB 520s, they plug into the back of the switches, I've tried Rs components, trawled the net, and tried my local auto sparks. I could just put spade connectors on the end of the loom, but if possible would like to sort the job properly.
@ACEngineering any ideas ?
Thanks HH
IMG_20200723_225123672.jpg
IMG_20200724_101448434.jpg
IMG_20200724_101436680.jpg
 

ACEngineering

Member
Location
Oxon
Anyone know where I could get some of these wiring plugs.
Their off a 2001 JCB 520s, they plug into the back of the switches, I've tried Rs components, trawled the net, and tried my local auto sparks. I could just put spade connectors on the end of the loom, but if possible would like to sort the job properly.
@ACEngineering any ideas ?
Thanks HH
View attachment 896643View attachment 896644View attachment 896645

Manitou have a separate pdf file covering all wiring loom plugs and pins on all machines.

Can take a while to trawl though and find what you want sometimes.
 

NI agri-food stakeholder groups discuss climate change bill with committee

  • 33
  • 0
Written by Richard Halleron from Agriland

The Livestock and Meat Commission (LMC) recently submitted oral evidence to members of the Stormont Agriculture, Environment and Rural Affairs (AERA) committee on the content and potential impact of the Northern Ireland Climate Change Bill (No.2).

This draft legislation was recently introduced to the Northern Ireland Assembly by the Department of Agriculture, Environment and Rural Affairs (DAERA) in conjunction with agriculture minister, Edwin Poots.

“We were accompanied by representatives from a wide range of food industry bodies, including the Northern Ireland Meat Exporters’ Association,the Ulster Farmers’ Union [UFU], Northern...
Top