Jd 2630 data to 2600

[JDJ]

Can it be done? I have all field boundaries and ab lines, ab curves and implements, etc on the 2630 screen.
Bought a second hand 2600 screen and I could be neat to have all this on the 2600.

Maby someone can guide me?

Jacob.

 

[Rural Rob]

To do want you want you need Gatekeeper and JD devices. Import into gk as 2630 and export in 2600 format to a flash card. That will load into your screen. You can also send to GS3 if you buy a new JD. If lost give Gatekeeper support a ring, they are really good at talking you through the process. Hope this helps.

 

[CPP]

The only ways is as @Rural Rob has said

Or if you can get hold of a copy of the apex software that's used in the usa

 

[JDJ]

Ok must have a look at gatekeeper then.
We tried with apex demo, but it only supports English, this means that when the language on the device is Danish, all the implements and crops despair when exported from apex. Then you end up with a screen where there is no implements or crops to select.
Thanks for the help.

 

[JDJ]

I talked to the company and has come to the conclusion that the price of the software is way too much. Can't justify the use that kind of money on a small farm like mine.
If anyone has any idea how to get it working, feel free to pm me ☺

 

[reboot]

You can see the co-ordinates and heading figures of straight lines and program to the other box.

Like a tractor mowing with auto steer can share the a-b line with the rake and baler driver.

I re map field boundaries with a single cultivator pass as soon as i enter the field then set an inner headland for accurate in/outs to make the headland look neater.

 

[reboot]

Cant help with curves though youll just have to re record them.

Unless your rtk then saving boundaries and lines is useless anyway because of satellite drift.

Implement settings i keep a copy on a notepad anyway the first time i measure

 

[Brisel]

This might be available through the JD Link portal in the future. Wireless Data Transfer already sends yield maps etc across, so why not GPS information? Can 2600 screens be used for wireless data transfer?

The other way that it might be doable could be to copy & paste the folders containing the information. This is easy enough to do with 2600 screens because the data is held in the memory card. How you get it out of the memory of the 2630 is another matter but I'm sure a decent computer hacker could look around inside the screen.

 

[JDJ]

You can see the co-ordinates and heading figures of straight lines and program to the other box.

Like a tractor mowing with auto steer can share the a-b line with the rake and baler driver.

I re map field boundaries with a single cultivator pass as soon as i enter the field then set an inner headland for accurate in/outs to make the headland look neater.

I might end up typing in the a point plus angel in manually like your suggestion. Can't remap them as the screen is on the combine and on most of my fields is surrounded by trees and the gps will lose signal. [emoji12]

This might be available through the JD Link portal in the future. Wireless Data Transfer already sends yield maps etc across, so why not GPS information? Can 2600 screens be used for wireless data transfer?

The other way that it might be doable could be to copy & paste the folders containing the information. This is easy enough to do with 2600 screens because the data is held in the memory card. How you get it out of the memory of the 2630 is another matter but I'm sure a decent computer hacker could look around inside the screen.

Agreed that mydeere solution will be able to do it in the future, already got some great functions.

It's easy to get data out of the 2630, but the problem is the 2600 can't read the data.
That's why I need a program to convert it. [emoji2]


Does anyone know where the field boundaries is stored on the 2600 data card.?

 

[Brisel]

Does anyone know where the field boundaries is stored on the 2600 data card.?

I have tried looking in the various folders but I can't make out what means what as it is all in code.

 

[CPP]

It can be done there is a software patch to convert 2600 to 2630 data