Jd 6930 Ecu problem

[Cmoran]

My 6930 standard is very down on power got it plugged in and these are the codes can anyone recommend a remedy

 

[Tractortech]

Now Then..
Has it been reprogrammed recently??
On the right hand side of the screen are 2 columns. One is 'Active'/ 'Stored', the other is the occurrence count, your picture doesn't show them..

 

[Cmoran]

Now Then..
Has it been reprogrammed recently??
On the right hand side of the screen are 2 columns. One is 'Active'/ 'Stored', the other is the occurrence count, your picture doesn't show them..

No I’ve never touched it but it was remapped from new by a very good company that has done work for me and never any issues. I’ll ask mechanic to plug in again to get that info. Thanks

 

[Tractortech]

Also, you don't say how many hours it has done. If you delete the codes, is power restored??? Do the codes immediately return when you start it/drive it??

 

[Sausage]

To have the software your mechanic must be a JD fitter, doesn’t he have any thoughts on it.

 

[Timbo]

To have the software your mechanic must be a JD fitter, doesn’t he have any thoughts on it.

Not necessarily, If the tuner is worth his salt he will have kept the copy of the original software that was downloaded when the tractor was mapped . This will have the right checksums so can be re-flashed without issue.

 

[Cmoran]

Also, you don't say how many hours it has done. If you delete the codes, is power restored??? Do the codes immediately return when you start it/drive it??

My mechanic arrived this morning with two little relays (forget what he called them) one for behind fuse board and one under bonnet and is working fine again.

 

[marco]

My mechanic arrived this morning with two little relays (forget what he called them) one for behind fuse board and one under bonnet and is working fine again.

Can bus terminators