JD combine parts specialists??

[davidroberts30]

looking to fit new rasp bars on my 945 combine
parts are obsolete from JD
a google shows them available in Poland
wondering who may stock them in UK?

 

[Ducati899]

Not sure if these chaps near me would have anything but maybe worth a call

 

[Hooby Farmer]

I've used combine fabs before, they are always helpful keeping my 950 and 955 running

 

[nxy]

Whats the problem with buying them from Poland?

I buy most of my combine parts from Agrodoctor in Poland, though I am in France.

They are listing JD 945 rasp bars for 28 euros a pair. If the transports a killer buy some fingers and stuff. They are so much cheaper than anybody else.

Set of rasp bars AZ10688 suitable for John Deere [Agro Parts] OEM:AZ10688 for John Deere, order at online shop agrodoctor.eu

Thresher Set of rasp bars AZ10688 suitable for John Deere [Agro Parts], OEM AZ10688 for Combine harvester John Deere, Set of rasp bars (L+L) for thresher of John Deere (330, 925, 930, 9032, 935, 940, 945) combine harvesters. Dimention in MM: Length..., Best price, Photo, Specifications, Buy at...

agrodoctor.eu

 

[JLLM]

Nothing with Roy Rees or Dil Agri ?

 

[Fergieman]

Try manners combine parts. They are breakers and run a fabrication shop but supply new stuff as well.

 

[davidroberts30]

Whats the problem with buying them from Poland?

I buy most of my combine parts from Agrodoctor in Poland, though I am in France.

They are listing JD 945 rasp bars for 28 euros a pair. If the transports a killer buy some fingers and stuff. They are so much cheaper than anybody else.

Set of rasp bars AZ10688 suitable for John Deere [Agro Parts] OEM:AZ10688 for John Deere, order at online shop agrodoctor.eu

Thresher Set of rasp bars AZ10688 suitable for John Deere [Agro Parts], OEM AZ10688 for Combine harvester John Deere, Set of rasp bars (L+L) for thresher of John Deere (330, 925, 930, 9032, 935, 940, 945) combine harvesters. Dimention in MM: Length..., Best price, Photo, Specifications, Buy at...

agrodoctor.eu

no problem at all just wondered if there was any in uk first

Nothing with Roy Rees or Dil Agri ?

as its a 3 walker jd havent made some bits for years
plus id clean forgot about RR

 

[RmfJ]

looking to fit new rasp bars on my 945 combine
parts are obsolete from JD
a google shows them available in Poland
wondering who may stock them in UK?

Were there any lying in the back of Dai’s ‘workshop’?

 

[davidroberts30]

Whats the problem with buying them from Poland?

I buy most of my combine parts from Agrodoctor in Poland, though I am in France.

They are listing JD 945 rasp bars for 28 euros a pair. If the transports a killer buy some fingers and stuff. They are so much cheaper than anybody else.

Set of rasp bars AZ10688 suitable for John Deere [Agro Parts] OEM:AZ10688 for John Deere, order at online shop agrodoctor.eu

Thresher Set of rasp bars AZ10688 suitable for John Deere [Agro Parts], OEM AZ10688 for Combine harvester John Deere, Set of rasp bars (L+L) for thresher of John Deere (330, 925, 930, 9032, 935, 940, 945) combine harvesters. Dimention in MM: Length..., Best price, Photo, Specifications, Buy at...

agrodoctor.eu

but its good to know agrodoctor are genuine enough

 

[davidroberts30]

Were there any lying in the back of Dai’s ‘workshop’?

4's and bigger

 

[nxy]

Probably a stupid question but is it possible to cut down the wider combine types?

 

[davidroberts30]

Probably a stupid question but is it possible to cut down the wider combine types?

Yes as long as the bolt pattern is the same
Be honest I'll probably try Poland

 

[goldeneagle]

but its good to know agrodoctor are genuine enough

Used them before and can vouch for them, sensible prices for a lot of parts, does take a couple of days to deliver but not the end of the world if winter service parts.

 

[davidroberts30]

Used them before and can vouch for them, sensible prices for a lot of parts, does take a couple of days to deliver but not the end of the world if winter service parts.

Does now count as winter service

 

[ih1455xl]

Could try Jmt engineering

 

[Ioan annwyl]

I used to cut down, longer rasp bars to suit, but make sure the pair fitting opposite each other weigh the same, and all within a few grams of each other.
Fit new bolts as well.
Kept a lot of these old deers going cutting down and fabricating sheet parts. No spares at RR now, Dil selling some stuff, has a 952 on bottom yard, was a minter but been out for 3 or 4 years, Shame.
Have you tried TAG at Narberth?

 

[davidroberts30]

I used to cut down, longer rasp bars to suit, but make sure the pair fitting opposite each other weigh the same, and all within a few grams of each other.
Fit new bolts as well.
Kept a lot of these old deers going cutting down and fabricating sheet parts. No spares at RR now, Dil selling some stuff, has a 952 on bottom yard, was a minter but been out for 3 or 4 years, Shame.
Have you tried TAG at Narberth?

Yes alun said jd dont stock parts now
I'll try Poland as 4w bars are £100 a pair from jd

 

[Oat]

As mentioned above, try JMT Engineering at Ladbroke, Warks. Marks is a bit of a character, but combines go there to die, so he has allsorts

 

[bobk]

Whats the problem with buying them from Poland?

I buy most of my combine parts from Agrodoctor in Poland, though I am in France.

They are listing JD 945 rasp bars for 28 euros a pair. If the transports a killer buy some fingers and stuff. They are so much cheaper than anybody else.

Set of rasp bars AZ10688 suitable for John Deere [Agro Parts] OEM:AZ10688 for John Deere, order at online shop agrodoctor.eu

Thresher Set of rasp bars AZ10688 suitable for John Deere [Agro Parts], OEM AZ10688 for Combine harvester John Deere, Set of rasp bars (L+L) for thresher of John Deere (330, 925, 930, 9032, 935, 940, 945) combine harvesters. Dimention in MM: Length..., Best price, Photo, Specifications, Buy at...

agrodoctor.eu

Just been on agrodoctor site for a claas belt , was twice the price of one from Norwich

 

[mixed breed]

did you order them of agrodoctor afterwards @davidroberts30 , did they arrive?
Im temped to buy a new sprocket and block bearings for the walkers on my 1055, massive saving over what the jd lot want here.