JD Display Speaker?

[Phil P]

Trying to find a new speaker for an R series display, anyone got any ideas?
@Pheasant Surprise ?

This is the sticker that was on the wires, can’t seem to match any numbers on RS site.

 

[Wombat]

i would start by searching 8ohm (is it 2.0w) covered byt the pen mark at whatever the diameter of the speaker and see what comes up

 

[tweedale terrier]

Try David king electronics for help

 

[Wombat]

Bit more of a google on the speaker number gives this https://www.eciaauthorized.com/en/part/challenge/CE-4408B04

I would assume its a 4408 means 44mm 8ohm not sure the last bit

 

[Phil P]

Try David king electronics for help

Tried DK, and I’ll be honest they couldn’t have been much more unhelpful if they tried other then hanging up! Only interested if I was going to send them the unit then charge me to plug a speaker in . I’ve always recommended them to people in the past but don’t think I’ll be bothering again!

Anyway, think I may have found an equivalent on RS. Will have to Cross reference a couple of measurements but think it will fit.

Thanks your the help guys?

 

[Deutz631]

https://www.ws-elektronik.de/

https://ilgenfritz.biz/

Maybe send these a email, they're german but they seem to reman a whole lot of tractor electronics , maybe they will know.

They don't have a english website, so maybe with google translate