John Deere 6150R and 7" display replacement with used display ?

[SteveO]

I have one 6150R with full options and AutoPowr transmission. My display has gone bad and I have one for spare from 6140R but I have no idea of its equipment and transmission type.
When I connect that display I dont have transmission and few other options on that "new" display.

Obviously I need to write new software on that SDUA-T screen that is from my tractor. How to do it ? I have Advisor and cable of needed. I have heard that it needs to be flashed over USB ?

Thanks

 

[Tractortech]

Now Then..
It's probably a dealer job. Software is available through Service Advisor and is uploaded to the tractor using both Service Advisor and a USB drive in the socket next to the Command Center..
I've always done it that way..

 

[SteveO]

Can you tell me what specific software I need ? I can get software and I have EDL so I think JD mechanic can do it with some directions but I dont have online SA.

Thanks

 

[Tractortech]

As I recall you have SA4??
You'll need someone who has access to JD 'SDS',

 

[SteveO]

Your recall good I have SA 5.2 now for few weeks but I dont have Dealer Access. I can get all payloads for the tractor.
So basically I need on instructions how to do it.

Btw. wth is SDS ?

Thanks a lot

 

[CPP]

Long as the screens are the same it a plug and play
They are only displays all software is on the tractor
Has the old screen got a autotrac activation on it

 

[SteveO]

Yes they are same part number but it is not plug&play, it simply does not show all options that I have on the tractor.
When I plug old one back all is ok. This one is from used 6140R and it does not show transmission and other options. It seems that it has memory from like PowrQuad and manual spools and then it cannot see mine.

Has no Autotrac unlock