John deere 6320 dash backlight out

[hally]

As above likely a fuse gone but can’t make any sense of the fuseboard diagram, and cant see a fuse gone but can’t really tell which one it is. Anybody any idea where to look when it’s daylight. TIA.

 

[Tractordave]

Assuming all other lights are working- most often both bulbs blown. Quite easy to change:
4x Hex screws under front of brown dash panel. Remove screws and GENTLY lift at the front and remove.
The two gold coloured Phillips screws at the base of the BIF (clock unit)
Lift out, unclip and remove.
You can now simply replace the bulbs.
NOTE: when retightening the hex screws only tighten them very slightly. It’s VERY easy to overtighten and crack the panel!

 

[hally]

Assuming all other lights are working- most often both bulbs blown. Quite easy to change:
4x Hex screws under front of brown dash panel. Remove screws and GENTLY lift at the front and remove.
The two gold coloured Phillips screws at the base of the BIF (clock unit)
Lift out, unclip and remove.
You can now simply replace the bulbs.
NOTE: when retightening the hex screws only tighten them very slightly. It’s VERY easy to overtighten and crack the panel!

Great thanks for that