I’ve got a 2004 6920s with tls, I recently got the accumulators regassed to the pressure stamped on them because I noticed it slam down on axle a lot when I’d drop the plough. Now that I’ve had that done it’s become very uncomfortable to drive without either the loader or weight block on the front, it used to be very comfortable with no weight, not it just hops down the road. I’ve had them rechecked since and the front two are still perfect but the third one was down a bit which apparently shouldn’t affect it much but it got topped up anyway, when I refitted them it was just as hard. Is it possible that there’s something wrong in the valve or is the 40bar that’s stamped on the accumulators just too much pressure? The level sensor seems to be fine because it always finds the right height when I start driving. I’ve opened the pipe going to the third accumulator a few times after driving it and there’s not much pressure behind it.