John Deere gps

[copse]

Is there any I can mark the tramlines on my track lines on the screen? Would be every fourth one for 24 metres.

 

[Agriimark]

yes, which screen are you running?

 

[copse]

I’m not sure what it’s called but in a 2018 215 and built into the armrest.

 

[Agriimark]

like this?

 

[copse]

like this?

 

[copse]

 

[Agriimark]

go into your guidance page, information and settings. guidance master should be the first thing displayed at the top. scroll down to general settings and you should be able to turn tramlines on. when it says on exit that page and set your a+b line like normal. once thats done a tram line settings page should pop up with trac spacing so you can select how many runs between a tramline width depending. press ok when you have selected the figure and tramlines should appear a different colour to the rest of your runs

 

[copse]

Like the one I’ve circled

 

[benny6910]

have you ever updated the software? My 2018 Deere didn’t have it until I updated the software.

 

[copse]

go into your guidance page, information and settings. guidance master should be the first thing displayed at the top. scroll down to general settings and you should be able to turn tramlines on. when it says on exit that page and set your a+b line like normal. once thats done a tram line settings page should pop up with trac spacing so you can select how many runs between a tramline width depending. press ok when you have selected the figure and tramlines should appear a different colour to the rest of your runs

That’s great thanks I’ll have a look in the morning

 

[copse]

have you ever updated the software? My 2018 Deere didn’t have it until I updated the software.

I think it was done a couple of years ago.

 

[benny6910]

I think it was done a couple of years ago.

It might not be the latest software then so it may not have the function.

 

[KB6930]

It's the controller not the software when we got our 2017 7310r we got the upgraded controller.
At 2018 you might be lucky