John deere wheel spacers

[Will 1594]

Any one got a pair of wheel spacers ,for old 50 series with 150 mm hole ,8 stud

 

[gmc541]

I didn't think that you are able to use these as spacers, I thought that they are basically a jumbo size all in one washer. The rim needs to sit tight to the hub

 

[solo]

I didn't think that you are able to use these as spacers, I thought that they are basically a jumbo size all in one washer. The rim needs to sit tight to the hub

I used to use them to push row crops out to 80” . The ones I used bolted to the flange then the wheel studs screwed into the washer itself.

 

[Sharpy]

You will get them from 30 series tractors (2030, 2130 etc) . The 40 and 50 series had slightly longer half shafts so didn't get any fitted.

 

[Will 1594]

I used to use them to push row crops out to 80” . The ones I used bolted to the flange then the wheel studs screwed into the washer itself.

Putting the Carlos fandango wheels on the little 1550 , and are too close to cab , actually touching , need 40 mm. ,
Just going to look and see how many old lorry wheels kicking about to make some spacers to bolt to ad adapter plate

 

[Chae1]

Putting the Carlos fandango wheels on the little 1550 , and are too close to cab , actually touching , need 40 mm. ,
Just going to look and see how many old lorry wheels kicking about to make some spacers to bolt to ad adapter plate

I've some rowcrops off a 2040s you can have if centres any use as spacers

 

[yorkie]

Putting the Carlos fandango wheels on the little 1550 , and are too close to cab , actually touching , need 40 mm. ,
Just going to look and see how many old lorry wheels kicking about to make some spacers to bolt to ad adapter plate

jd do a part for 6000 series below 6800 to get the wheels out to 80''

 

[solo]

My set were originally off a jd710 back in the 1960's. They have been used on a 2140 and more recently on a 6410. Whilst I still own the 6410 they will be kept if I need them again.

 

[Will 1594]

I've some rowcrops off a 2040s you can have if centres any use as spacers

Thanks ,but have a superb lazer cutting man who cuts outany stuff i need ,have quite a few files of drawings now for different adapter plates ,made some so can put big front wheels on back of little tractors
Was going to put 520/70/30 on back and duals ,but looked huge
Solo ,ringing nick young ,he may have some

 

[Chuckie]

Plenty of modern MF with similar spacers on, I think they are the same stud fitting, but you need longer bolts

 

[Will 1594]

Plenty of modern MF with similar spacers on, I think they are the same stud fitting, but you need longer bolts

Will measure them.

 

[Chuckie]

Like this type^^^^^

 

[Will 1594]

Like this type^^^^^

Just been at cheffins , yes they would work , but bumped into a chap who get mini matt bits from and asked him if he had any jd spacers , maybe ,come tommorow night before dark ,have some somewhere ,or nick young

 

[Will 1594]

Got a pair , with correct studs and top hat washers. , good old mr grumpy had some