Lol, we have a laugh and plenty of banter so tricks like this are to be expected! Besides if you get to sort out a 2ft error at most matches 6” error is childs play!For fudge sake
Hi Fergie Ploughman, when your neighbours ploughing is not straight, do you measure from the furrow edge on your side to front disc of your plough, 'whilst your tractor is in neighbours furrow bottom', as you move along or is there a better wayThe "two runs to sort it" is a load of tosh really, because at the end of the day you cannot ignore a mess when looking at the overall appearance. I know we all talk about the two runs being ignored, but the better ploughman would always make a decent job. No matter how far out it is (within reason eg wrong peg ploughed to would be total fudge up) to need to get parallel in the most professional manner. Its amazing how much you can shift,, with mine I can start with 0" and be turning probably 24" by the end. That's extreme, but in a couple of runs you can get most of it out the way and fine tune the rest down to the finish. I can only think of a couple of occasions where I have had to put my pegs up and start again, and that was with the stewards agreement as it was impossible to plough it out.
Farmer judges.....LOL, get the cows milked, stick the tweeds on and then try and see which ploughing looks the prettiest!!! There's plenty of them around.. Sometimes its fun to ask them politely when they'd ploughed last to make conversation, which also often makes me walk away in dismay...
Scottish vintage is back down to 12 furrs now.Aye it 16 furrows in Scotland, is that were you are, and as you say on narrow plots there is not much left
Hi Fergie Ploughman, when your neighbours ploughing is not straight, do you measure from the furrow edge on your side to front disc of your plough, 'whilst your tractor is in neighbours furrow bottom', as you move along or is there a better way
Gave up on the exact bit years ago!!!whichever way you do it then you need the exact number of standing furrows left after the oddments are taken off
That's just the type of neighbour I'm talking aboutDear, oh dear, put the tape measure away, keep er lit and get on with it.
Before I set in the neighbours plot I measure top, middle and bottom to suss out what we’re dealing with. I’ll then drop in and try and plough it out as required. I only ever measure from furrow wall to my landside as that’s the ground you have to deal with. I personally think getting straight is the priority as bent looks bad to a judges eye, whereas he can’t see if it’s parallel. You can then get it parallel a run at a time…Hi Fergie Ploughman, when your neighbours ploughing is not straight, do you measure from the furrow edge on your side to front disc of your plough, 'whilst your tractor is in neighbours furrow bottom', as you move along or is there a better way
Thank you, great advice. I have good movement in my plough, I can plough 10inches min to 23inches max, which would take care of most casesBefore I set in the neighbours plot I measure top, middle and bottom to suss out what we’re dealing with. I’ll then drop in and try and plough it out as required. I only ever measure from furrow wall to my landside as that’s the ground you have to deal with. I personally think getting straight is the priority as bent looks bad to a judges eye, whereas he can’t see if it’s parallel. You can then get it parallel a run at a time…