KRM Agitator bearing

Albert

Member
Hi guys

One of my agitators on my M2W seems a bit wobbly. I'm presuming the bearing needs replacing.

Has anyone done this job on your own spreader? Is it straight forward?

Any tips on how to do it are greatly appreciated

Thanks
 

fastfish

Member
Location
Devon
If memory serves me right held in place by a circling the agitator piece should just pull of but the bearing part that’s left on the shaft might need to be cut with small angle grinder carefully hope this helps
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 80 42.3%
  • Up to 25%

    Votes: 66 34.9%
  • 25-50%

    Votes: 30 15.9%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,293
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top