Kubota M8000 bits

[TripleSix]

M8560 seemed to be starving of oil, changed the hydraulic suction filters, a metal part was stuck in one of them.

Tractor seems fine now it has new filters.

Anyone identify where the part is from?

 

[forblue]

Don't know about kubota but that looks like part of a plate, pto clutch pack, or diff lock, how thick is it..

 

[TripleSix]

Don't know about kubota but that looks like part of a plate, pto clutch pack, or diff lock, how thick is it..

2-3mm thick

 

[H200GT]

I’d cut open the old filters see if anything else is in them

 

[Recoil]

I have a 9540. Clutch started slipping at 2500 hours. Sent to dealer who fixed. Had same problem as you a few months later. I changed filters and oil and been fine now 2000 hours later. I suspect part was dropped while changing clutch.

The bits I found were smaller than yours and were part of a large circlip of some sort roughly 10cm in diameter.

 

[Yale]

Isn’t it a ZF transmission similar to some Deutz,Landini etc.?