Kuhn 303 YGL/Manual

KB6930

Member
Location
Borders
Hi amount of oil in gear boxs and bed..I only have manual that is in French! I bought last year but when used this year it has worn the splines of the shaft from gear box and coupling to the bed..ever had that problem?
They wear out there after a lot of work I had 1 for a few seasons and was ok but a local contractor has one that's seen better days and had a fair bit of bother with that the other year I can't remember what's all in there but replace everything you can at the same time he didn't and was laid up again after a short while
 

Jamesywick3

New Member
Hi, what causes it to break the bolt on the end of that shaft, we replaced it and the drive flange and within 30 acres it did it again. We have now replaced alot of the bushes to see if it is that but if anyone else had this issue any info would be great
 

Kapitifarmer

Member
Livestock Farmer
If you’re stripping that spline regularly and breaking random bolts you might find mower carrier frame is twisted, we had that problem with a 2nd hand machine.
Very hard to find twist in frame but can be relieved by assembling with main drive gearbox unbolted to mower frame and shifting gearbox mounting holes to suit where it wants to naturally sit.
went from stripping drive spline after 15ha to to not being a problem after 500 plus ha and 5 years.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.2%
  • Up to 25%

    Votes: 65 34.8%
  • 25-50%

    Votes: 30 16.0%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,289
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top