Kuhn bed stuck

Take the 4 10 mm bolts out of the top of the hat then the 4 17 mm out of inside the top hat then 4 more nuts off the satellite or hub if it’s a modern type
If it’s the old type it’s a pain
 

tinman

Member
Location
Ulster
it wouldn't happen to be anything like a blade that's locked it.
it id be rare for a disc to stick just from that alone, unless its dinged a few teeth fairly badly, there would normally be more of a high spot but you would be able to turn it with some force.

as livestock says, its handy of its the model you can pull the hub off but if its the other version then its a complete bed strip.
 

glasshouse

Member
Location
lothians
it wouldn't happen to be anything like a blade that's locked it.
it id be rare for a disc to stick just from that alone, unless its dinged a few teeth fairly badly, there would normally be more of a high spot but you would be able to turn it with some force.

as livestock says, its handy of its the model you can pull the hub off but if its the other version then its a complete bed strip.
Blades are in place
Its solid
Took it to kuhn dealer today to see about warranty?
 

glasshouse

Member
Location
lothians
it wouldn't happen to be anything like a blade that's locked it.
it id be rare for a disc to stick just from that alone, unless its dinged a few teeth fairly badly, there would normally be more of a high spot but you would be able to turn it with some force.

as livestock says, its handy of its the model you can pull the hub off but if its the other version then its a complete bed strip.
Blades are in place
Its solid
Took it to kuhn dealer today to see about warranty?
 

Will you help clear snow?

  • yes

    Votes: 68 32.1%
  • no

    Votes: 144 67.9%

The London Palladium event “BPR Seminar”

  • 9,537
  • 129
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top