glasshouse
Member
- Location
- lothians
How do you get into this,?
Clipped a stone on the back swathe and outer disc is stuck
Clipped a stone on the back swathe and outer disc is stuck
Kuhn bed stuck
- Thread starter glasshouse
- Start date
livestock 1
Member
Take the 4 10 mm bolts out of the top of the hat then the 4 17 mm out of inside the top hat then 4 more nuts off the satellite or hub if it’s a modern type
If it’s the old type it’s a pain
If it’s the old type it’s a pain
it wouldn't happen to be anything like a blade that's locked it.
it id be rare for a disc to stick just from that alone, unless its dinged a few teeth fairly badly, there would normally be more of a high spot but you would be able to turn it with some force.
as livestock says, its handy of its the model you can pull the hub off but if its the other version then its a complete bed strip.
it id be rare for a disc to stick just from that alone, unless its dinged a few teeth fairly badly, there would normally be more of a high spot but you would be able to turn it with some force.
as livestock says, its handy of its the model you can pull the hub off but if its the other version then its a complete bed strip.
What model is it? @glasshouse
glasshouse
Member
- Location
- lothians
2016 gmd280
glasshouse
Member
- Location
- lothians
livestock 1
Member
Is it not just a bent blade stuck on a bolt?
glasshouse
Member
- Location
- lothians
You took a 4yr old Mower to the dealer to see about warranty..
I'd say you told him it's done nothing too.
??