Kuhn power Harrow

[dickie-boy]

Could anybody help I’m trying to remove a Kuhn power Harrow gearbox, it’s a 6 metre and the gear box is on the right hand bed I’ve removed all the bolts to release the right hand bed giving us room to lift the gearbox off but it won’t budge, should it just lift off the shaft that goes right through the bed to the middle rotor or is there more holding it other than it’s 4 bolts

 

[Lofty1984]

Are you certain you’ve got all the bolts 4 doesn’t seem allot to hold it on

 

[casemx 270]

Could anybody help I’m trying to remove a Kuhn power Harrow gearbox, it’s a 6 metre and the gear box is on the right hand bed I’ve removed all the bolts to release the right hand bed giving us room to lift the gearbox off but it won’t budge, should it just lift off the shaft that goes right through the bed to the middle rotor or is there more holding it other than it’s 4 bolts

We had to remove a gearbox on a 5 metre Kuhn there were loads of bolts to remove probably 16 or 20 when all the bolts were out we just lifted the gearbox off with a forklift it's very heavy

 

[dickie-boy]

Thanks for the replies, two bolts underneath coming up into the gearbox undid them and off she popped

 

[Lofty1984]

Thanks for the replies, two bolts underneath coming up into the gearbox undid them and off she popped

Put loctite on them two buggers when they go back in

 

[Bobthebuilder]

Was just about to say there are bolts coming up from underneath as well

 

[dickie-boy]

Put loctite on them two buggers when they go back in

Ok cheers will do