Good Morning. I have a Focus 2 monitor from Kverneland and I need help. I need the connection pinouts or wiring diagram for the cable that goes to the monitor. I'm not getting it started. I'm not getting it started. I own it in a Kuhn VB2160 baler. Connector A and Isobus connector.
Kuhn VT 50 terminal and ISOBUS cabling help
- Thread starter Pheasant Surprise
- Start date
Northern farmer
Member
- Location
- North
The display connector pins appear on the terminal manual. Do you need something more?
1 radar speed signal, 2 wheel speed signal, 3 on switch signal, 4 CAN HI, 5 Ground, 6 CAN LO, 7 switched +12V.
Northern farmer
Member
- Location
- North
Looks very odd, not even sure if I read that cable diagram correctly.
- Location
- Pinnaroo. South Australia
The second picture is not an isobus 11783 cable pinout. It is an iso 11786 diagram. This plugs into the 7 pin plug in the cab of newer tractors not the 9 pin isobus 11783 socket in the cabs.
normally when I see these plugs the control box will have a seperate power supply.
edit
Looks like it can supply power to box. Would need to ensure these pins are populated in the tractor.
normally when I see these plugs the control box will have a seperate power supply.
edit
Looks like it can supply power to box. Would need to ensure these pins are populated in the tractor.
cosmagedon
Member
- Location
- North Wales
Why can't I tag Pheasant Suprise anymore? I haven't seen him on here in a long time 
Made a cable up yesterday to run a VT50 in a T7 cab, got fed up of constantly pressing the wrong buttons on the intelliview screen
I find the blister buttons on the VT50 a bit easier to use without having to constantly watch the screen and what buttons my fat fingers are hitting 
Made a cable up yesterday to run a VT50 in a T7 cab, got fed up of constantly pressing the wrong buttons on the intelliview screen
I find the blister buttons on the VT50 a bit easier to use without having to constantly watch the screen and what buttons my fat fingers are hitting Attachments
- Location
- North West
Why can't I tag Pheasant Suprise anymore? I haven't seen him on here in a long time ☹
Made a cable up yesterday to run a VT50 in a T7 cab, got fed up of constantly pressing the wrong buttons on the intelliview screen
He’s not been on since may last year and I was wondering myself the other day if he was ok! It’s not good when people just disappear in the current climate
. Hopefully he’s just taking a break from the forum and everything is ok. @Pheasant Suprise
cosmagedon
Member
- Location
- North Wales
Yes, I hope he's ok!
- Tags
- t7