Kv plough parts used

[glasshouse]

Who sells kv parts in scotland?

 

[sahara]

Lloyds?

I'm sure they were KV dealers when I was there demmo-ing combines. (It was 1998 though!)

 

[Happy]

Who sells kv parts in scotland?

Ernest Charlton from Kirriemuir in Angus deals a fair bit in used Kv’s and breaking them for parts.
No contact details for him myself but someone like @HAM135 will probably be able to help you with that.

 

[glasshouse]

Lloyds?

I'm sure they were KV dealers when I was there demmo-ing combines. (It was 1998 though!)

Used i meant

 

[HAM135]

Ernest Charlton 07970 506155

 

[Bobthebuilder]

why would you want used plough parts scrap bin is best place for those

 

[glasshouse]

why would you want used plough parts scrap bin is best place for those

Is the brain in neutral again?

 

[Bobthebuilder]

Is the brain in neutral again?

not at all

 

[glasshouse]

not at all

Must be
Skimmer leg new £265
Used £60

 

[Bobthebuilder]

Must be
Skimmer leg new £265
Used £60

you need to re consider your original post then, surely your looking for a plough breaker rather than the wide term of KV parts, any machinery dealer/farm sale is probably the best bet then, pick up a whole plough for £500 at lanark sale

 

[Chae1]

Must be
Skimmer leg new £265
Used £60

Where do you get used one from?

 

[czechmate]

Must be
Skimmer leg new £265
Used £60

I’ll bet your wise to this (metal wears out REAL fast here), I weld a worn out point onto a new point

 

[glasshouse]

you need to re consider your original post then, surely your looking for a plough breaker rather than the wide term of KV parts, any machinery dealer/farm sale is probably the best bet then, pick up a whole plough for £500 at lanark sale

No
If i had wanted used kv metal i would have said so .
Wearing parts are called metal in these parts

 

[Bobthebuilder]

No
If i had wanted used kv metal i would have said so .
Wearing parts are called metal in these parts

but your wanting used/2nd are you not? as new is too expensive

 

[sahara]

Dunn's Ploughs are a good source of parts both wearing metal and frame stuff, they used to have a bit of a graveyard of dismantled ploughs.
Not sure how much KV stuff they did. They might be worth a call. They are not in Scotland but whenever I've had stuff from them, their freight charges from memory were not excessive.

Dunn's Ploughs | Homepage | Plough parts used and new for sale

 

[glasshouse]

but your wanting used/2nd are you not? as new is too expensive

I want a skimmer leg, not wearing metal.
If i was reduced to buying used wearing metal i would give up

 

[glasshouse]

I’ll bet your wise to this (metal wears out REAL fast here), I weld a worn out point onto a new point

Yoo must be half scottish

 

[glasshouse]

Where do you get used one from?

07970506155
Kirriemuir

 

[czechmate]

Yoo must be half scottish

Close.
Half Yorkshire

 

[glasshouse]

Close.
Half Yorkshire

Even tighter!!