Kverneland 7655 bale wrapper

[Andrew Gould]

Hi guys

I am having a few issues with my bale wrapper. It has been working perfectly this season but has now developed a issue with the cutting knifes they go up fine but when activated to close nothing happens. They hydraulics don't pressurise or anything I have the red light on the solenoid when pressing the button.

Any help or advise would be much appreciated

 

[dave7840]

Had similar on our kv round bale wrapper and i believe they are the same wrap holders/cutters. ours was that the sensor had come lose and it had slightly crushed the top, so it was reading that the cutters were down when up so would go up fine but would come down because it through they already were